An Idea who's time has come

[easy-lift guy]

I did give the pictured rig an A for being creative. Business is not what it use to be in Venice say 20 years ago. I have had to adjust my types of services offered but I don't believe I could ever be a mow and go knowing there is so much more that can be done
before I can say the job is done.
easy-lift guy

[Duekster]

Originally Posted by easy-lift guy

I did give the pictured rig an A for being creative. Business is not what it use to be in Venice say 20 years ago. I have had to adjust my types of services offered but I don't believe I could ever be a mow and go knowing there is so much more that can be done
before I can say the job is done.
easy-lift guy

It's called have a specialty rig. You can have two or three of these and one full service rig for the perodic services. That would be my plan.

[easy-lift guy]

Originally Posted by Duekster

It's called have a specialty rig. You can have two or three of these and one full service rig for the perodic services. That would be my plan.

I like that plan. Like having a mowing and pruning division.
easy-lift guy

[Duekster]

Originally Posted by easy-lift guy

I like that plan. Like having a mowing and pruning division.
easy-lift guy

Moving that direction as fast as I can. Again, I would not send this rig to a large commercial account either. I would like a box truck.

The truck trailer rig is around 40 feet long. I could back up 2 NPR's in the same space in the shop.

[Del9175]

I have a 2010 350 dually with this set up. Their are quite a few fabrication shops that are building these.
Posted via Mobile Device

[Johnagain]

If you had a dually with the inner tires removed then you could get a wider deck mounted on the frame that would sit much lower than one mounted above the tires. Lower to the ground could use a shorter gate and possibly make the bed longer to get 2 ztr's turned sideways.

[jvanvliet]

Stupid rig....

[Duekster]

Originally Posted by jvanvliet

Stupid rig....

I agree this one is not the best set up but I have seen similar designs with good layouts. I do not think they are putting Z on them but 36" WB too.

Some cages and tool rakes as well would go a long ways. If you put some stakes on the sides you could deliver some mulch or rock with it was well like a stake truck.

I see a lot of stake trucks and flat beds in the NE.

[Ric]

Originally Posted by jvanvliet

Stupid rig....

Look who is talking.


I never said this particular rig was A 1. I only post the picture as a sample of what could be done. I don't cut grass or trimm Green bushes, Only hairy ones. So this rig wouldn't work for me.

.

[mjlcare2]

Not for me or my company but to each his own.. Too bad he doesn't put a little effort into the appearance of his equipment/truck.. having a nice clean rig goes a long way with your customers.

somebody said something about taking the inner tires off the dually.. why buy the dually then.. blah blah blah.. more width for a bed.. you gotta have something in there otherwise it will be a single tire unit just like the non dually