Toro grandstand / Turbo Force Deck Not cutting bermuda as well anymore!!!
I have a Grandstand 48"/24hp with the mulch kit and mainly use it on bermuda lawns her in GA. I didnt notice any problems last year, but this year (late in season) it started cutting poorly. My description of poorly is it looks like I t not a flat cut all the way acroos the cutting path. Almost like it has two groves. Sorta like the drawing. I
Now I keep blades sharp, but now have purchased a new set of blades (high lift) 107-3192-03. We have been getting a lot rain down here and the grass is growing like crazy. I have had to raise my deck to 3"-3.5" on some yards. But even at 2.5" - 2.75" it will still do it.
*I checked tire pressure and matched.
*replaced deck belt (440 hrs) on old one
*leveled deck... 1/4 pitch to front. side to side is 1/8 to 1/4 off, but manual says that is with the limits.
Did I get a bad set of blades? I check them to be level with the magnamatic balancer?
Is is beacause I'm having to cut the bermuda so high that it does not respond well?
Should I try a different type blade? using high sail now.
Silverado 1500 4x4
6x12 Horton open trailer
Stihl FS90 Trimmer
Stihl FC90 Edger
Stihl FC75 Edger
Stihl HL90 Hedge Trimmer
Stihl MS250 Chain Saw
Redmax EBZ7500 Blower