|
|
|
|||||||
| Hustler Turf Equip Lawn Mowers & Turf Care Equipment |
 |
|
|
Thread Tools | Display Modes |
|
#1
09-17-2012, 04:56 AM
|
|||
|
|||
|
36/20 Will not start
Was running fine, loaded up to go to the next stop and now won't run...Confused
 
|
|
#2
09-19-2012, 01:04 PM
|
|||
|
|||
|
Have you checked the fuses. If it is full of oil naturally, check the low oil sensor to see it loosened up a just a little. You should not be able to wiggle it. If so tighten the outside nut to about 15 ft. lbs. This can and will cause intermittent motor stopping and no start. If it is a Kaw.? Ck ignition coils. If all else fails it time to meter trace. Good luck.
|
|
#3
09-22-2012, 11:26 PM
|
|||
|
|||
|
does it turn over or no ? I had the starter relay go out and it would start great one time and wouldn't engage the starter the next time
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
All times are GMT -4. The time now is 08:02 PM.
Forum Rules:
This hustlerturfequipment.com sponsored forum is administrator monitored. LawnSite.com does not allow any manufacturer competitor attacks and will strongly enforce this. If you want your discussion to be viewable by the public and responded to in a professional manner then please keep your discussions professional and to the point.
All discussions are viewed by the administration before being released to the public. Your post may not be made viewable for up to 48 hours. Please allow the manufacturer representative enough time to respond to your question or comment once made viewable.
LawnSite.com is not affiliated with the Excel Hustler company. This forum is provided by LawnSite.com to Excel Hustler in order to better server their customers
Linear Mode
