Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 04-30-2012, 11:45 AM
Jimno3 Jimno3 is offline
LawnSite Member
 
Join Date: Apr 2012
Location: Grand Rapids, MI
Posts: 2
Lazer Z wheel motor or pump?

New to the forum, searched for weeks but have not come up with a solution. I'm new to a Lazer, rest of my fleet is tracers. The right wheel works occassionally. Normally going straight forward or backward, not a problem. Come to the end of the run, the wheel will not go in reverse when I pull the stick back. If I move the stick forward 20%, it seems to "catch" and the machine moves forward, then reverse will work.
Going down a hill, the same right wheel doesn't seem to have resistence.

I have no oil leaks, no strange noises, the hydro oil is not murcky so I don't believe I have air in any of the lines. Doesn't matter if it is warm or cold, blades on or blades off. I've greased the belt tensioner for the pumps.

Does anyone have a suggestion as to what I should do next? Should I swap wheel motors? Pumps? I don't want shavings messing something up by waiting too long to fix or fixing the wrong thing.

Anything on the pump besides the relief I should check?

I really dislike paying my dealer for their work. I could probably buy a pump and wheel motor cheaper than paying the dealer to diagnose just one of the two.
Reply With Quote
  #2  
Old 05-01-2012, 06:29 AM
Johnagain's Avatar
Johnagain Johnagain is online now
LawnSite Senior Member
 
Join Date: Oct 2008
Location: Altoona, Florida
Posts: 367
My scag was doing about the same thing just not as bad. When you went to change direction from forward to reverse the wheel would take about 1-2 seconds then it would grab and start moving. My dealer replace the wheel motor under warranty.
Reply With Quote
  #3  
Old 05-17-2012, 09:55 PM
grobinsonpa grobinsonpa is offline
LawnSite Member
 
Join Date: Apr 2007
Location: Downingtown,PA
Posts: 29
Hi Jimno,
Did you resolve the wheel motor problem with your Lazer? I have the exact same thing happening with my Lazer. Only 1200 hrs on it. Let me know. Thanks, George
Reply With Quote
  #4  
Old 05-18-2012, 09:07 PM
Think Green's Avatar
Think Green Think Green is offline
LawnSite Silver Member
 
Join Date: Jan 2009
Location: Arkansas--Mississippi flood plains
Posts: 2,710
Guys,
Check the linkages on that side as well as the recoiling shock attached to the linkage. I believe the shock is become worn out.
Reply With Quote
  #5  
Old 05-19-2012, 12:45 AM
WorldsStrongestLandscaper's Avatar
WorldsStrongestLandscaper WorldsStrongestLandscaper is offline
LawnSite Member
 
Join Date: Nov 2010
Location: wolcott ct
Posts: 243
Posted via Mobile Device
Reply With Quote
  #6  
Old 07-02-2012, 10:42 PM
johnyredd99 johnyredd99 is offline
LawnSite Member
 
Join Date: Nov 2007
Location: gap,pa
Posts: 163
was there ever any fallow up to this? was the problem fixed?
__________________

Kerr's Property Maintenance
Proudly American owned & operated since 2002
Reply With Quote
  #7  
Old 07-03-2012, 09:52 AM
ash3001 ash3001 is offline
LawnSite Member
 
Join Date: Jul 2012
Location: maryland
Posts: 9
Quote:
Originally Posted by Think Green View Post
Guys,
Check the linkages on that side as well as the recoiling shock attached to the linkage. I believe the shock is become worn out.
I'm not sure if the toro's I've worked on are similar to these but are you talking about the neutral adjustment spring right above the pump linkage rod?
Reply With Quote
  #8  
Old 07-06-2012, 12:16 PM
chips17's Avatar
chips17 chips17 is offline
LawnSite Member
 
Join Date: Dec 2011
Location: PA
Posts: 81
i am in the middle of replacing the pumps on my scag TT. had the same problem. ive been in the process for like 3 months now working like a GOV. employee. ill probably replace both pumps and motors just so its like a brand new machine
__________________
Former "hoy landscaping"
Reply With Quote
  #9  
Old 09-25-2012, 05:00 PM
Jimno3 Jimno3 is offline
LawnSite Member
 
Join Date: Apr 2012
Location: Grand Rapids, MI
Posts: 2
Not resolved yet

Hey guys,
Thanks for the great info. I will check the linkages. If I go from full forward and slowly bring it back to stop, then reverse it does just fine. Once I get the problem fixed I'll post what fixed it.
Reply With Quote
  #10  
Old 09-25-2012, 08:02 PM
Cutter1 Cutter1 is offline
LawnSite Bronze Member
 
Join Date: Jul 2000
Location: Pittsburgh, Pa
Posts: 1,246
hopefully set screw on linkage is loose. If not its a pump. Once oil heats up it acts up. Had a few of those.
__________________
Leisure Time Lawn Care
"Live to cut, cut to live"
DON"T BLAME ME I DIDN"T VOTE FOR HIM!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 10:48 PM.

Page generated in 0.08483 seconds with 9 queries