Nasty one

[1idejim]

Originally Posted by muddywater

Explain how you are going to wire this in an office and then hang it on a wall in a few minutes.

Why? We who care already know.
Posted via Mobile Device

[muddywater]

Originally Posted by 1idejim

Why? We who care already know.
Posted via Mobile Device

Because you are full of crap. Few minutes my rear end. more like a bag of wire nuts and an hour on a stationmaster.

Its easy to sit from the sidelines and be a critic isnt it jim?
Posted via Mobile Device

[Wet_Boots]

It's always nice to have room for junction boxes.

[1idejim]

Originally Posted by muddywater

Because you are full of crap. Few minutes my rear end. more like a bag of wire nuts and an hour on a stationmaster.

If that is the best you can do lad you may want to take a night class at the local high school.

Its easy to sit from the sidelines and be a critic isnt it jim?

Your enormous ego sure is fragile. I have a buddy of mine that you could be twins with, little bitty guy we call shorty. Little banty rooster he is. Oh well, back to your comment. You prolly think that i sit around doing nothing all day every day. Not quite, i work most every day doing exactly what i want to do, i wouldn't trade my life for anyones. Every day is a little different. Yesterday we poured the floor for a pole building we're doing so i took the day off to build fence and ended up putting a neighbors cows back in, talked TDR with a young fellow from Tx, sure like helping him. Got everything but the transformer and the wire up. I guess that doesn't impress you but i am not on this rock to impress you
Posted via Mobile Device[/QUOTE]

Sorry it took so long to finish this reply, i took a call from a young gal that looked at the pole building this afternoon and wants one at her ranch with a solar pakage installed.
Posted via Mobile Device

[cjohn2000]

Last ESP LX I wired up. 8 zone residential system. I am liking the new ESP LX over the I-CORE. Last pic I plugged the access to high volt j box since we drilled a hole and brought power in through the back.

[cjohn2000]

Originally Posted by muddywater

Golf course rotor we replaced.

10' higher and you might have a shocking problem

[muddywater]

Originally Posted by 1idejim

If that is the best you can do lad you may want to take a night class at the local high school.
Your enormous ego sure is fragile. I have a buddy of mine that you could be twins with, little bitty guy we call shorty. Little banty rooster he is. Oh well, back to your comment. You prolly think that i sit around doing nothing all day every day. Not quite, i work most every day doing exactly what i want to do, i wouldn't trade my life for anyones. Every day is a little different. Yesterday we poured the floor for a pole building we're doing so i took the day off to build fence and ended up putting a neighbors cows back in, talked TDR with a young fellow from Tx, sure like helping him. Got everything but the transformer and the wire up. I guess that doesn't impress you but i am not on this rock to impress you

Sorry it took so long to finish this reply, i took a call from a young gal that looked at the pole building this afternoon and wants one at her ranch with a solar pakage installed.
Posted via Mobile Device

I still want to hear how you are going to install a 24 zone controller in a few minutes. Cat got your tongue?


A whole paragraph about how you don't have any work? and I am the one that needs night classes?

[cjohn2000]

Originally Posted by muddywater

wtf? another interesting one.

As far as I know in our area we can't touch any plumbing inside a building.

[muddywater]

Originally Posted by cjohn2000

Last ESP LX I wired up. 8 zone residential system. I am liking the new ESP LX over the I-CORE. Last pic I plugged the access to high volt j box since we drilled a hole and brought power in through the back.

clean install. why an lx over an esp since only 8 zones? future additions?

[muddywater]

Originally Posted by cjohn2000

As far as I know in our area we can't touch any plumbing inside a building.

A plumber installed those telescoping couplings. When the valves open, the manifold looks like a jumping jack.