The Green Industry's Resource Center

Prev Previous Post   Next Post Next
Old 10-10-2012, 10:35 AM
noaveragejoe noaveragejoe is offline
LawnSite Member
Join Date: Oct 2012
Location: cincinnati ohio
Posts: 6
Br 600 starting problems please help

At the beginning of the season I bought 3 br600's and 1 br420. The 600's were all in parts and were from a commercial company downsizing and these were their parts blowers but I figures out of 3 I could most likely get 2 running. When I got them after messing with them for a while I got two of them to start but they had the wrong spark plugs in them so after 20 minutes they died. I took them back into the garage and not realizing it was the spark plug I was messing round with the ignition coil, fly wheel etc. and couldnt get anything later I figured it must be the plug so I put the right plug in and it still wouldnt start. Noticing the spark was not very large I replaced the fly wheel and put a used coil on but in much better shape. After trying that I still can not get it to run. I cleaned the carb and air filter etc. I am out of ideas. Does anyone have anything I can try or heard of this before? There is a little bit bigger spark with the new fly wheel but not much? The compression is not great but they are not horrible... any thoughts would be appreciated, Thank you Joe
Reply With Quote

blower , parts , problem , repair , starting

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Grand View Media
All times are GMT -4. The time now is 08:24 PM.

Page generated in 0.10170 seconds with 9 queries