My Trucks equipment and work pictures

[Copacabana]

Originally Posted by FerrisDiesel

I have the same one as you do, pull start mounted on the front of my trailer. I took the pull cord assembly off the motor and rotated it so the pull cord was facing down......makes it much easier to pull start!

I thought about that when I got it. How easy is it to rotate it down? How you like the vac? Does it suck leaves when wet?

[Copacabana]

Originally Posted by BShaffer

Copa

How does that big four door pull that big dump trailer? I have Isuzu also and agree about the turning but what about power with that heavy trailer.

Only time I wished it had more power was when I had 17 yards of dyed brown mulch on the trailer and 10 yards of pine bark mulch on the truck on a 1/3 mile slope. On straight roads the power is there.

[FerrisDiesel]

Originally Posted by Copacabana

I thought about that when I got it. How easy is it to rotate it down? How you like the vac? Does it suck leaves when wet?

It was 4 bolts for the assembly rotate it and re bolt it. Oh.....and the clamp that holds the pullcord to the frame....5 minute job and worth the time! I gotta be honest, don't waste your money on the electric start. My vaccum is 6 years old and it starts on the first pull every time. Very important to turn the fuel off when you are driving down the road though, so the carb doesn't leak into the crank.
I love it, it will suck up wet leaves, just gotta go a little slower when sucking them up.

[Church2224]

Originally Posted by Copacabana

No, got it from Knabe's. STI has zero available.

Ah I see. STI has been out of stock of a lot of things for a while. I went there to see if they had the Exmark Commercial 2 and they were out, so I went to Heretick's in Hopewell.

Knabe usually has a good stock. They had nice Grandstand and a proline 21 a while back I was looking into. Do you know of any other good dealers in the area?

[Copacabana]

Originally Posted by FerrisDiesel

It was 4 bolts for the assembly rotate it and re bolt it. Oh.....and the clamp that holds the pullcord to the frame....5 minute job and worth the time! I gotta be honest, don't waste your money on the electric start. My vaccum is 6 years old and it starts on the first pull every time. Very important to turn the fuel off when you are driving down the road though, so the carb doesn't leak into the crank.
I love it, it will suck up wet leaves, just gotta go a little slower when sucking them up.

Alright! I'll get that done in the morning. Thanks for the tip!

[Copacabana]

Originally Posted by Church2224

Ah I see. STI has been out of stock of a lot of things for a while. I went there to see if they had the Exmark Commercial 2 and they were out, so I went to Heretick's in Hopewell.

Knabe usually has a good stock. They had nice Grandstand and a proline 21 a while back I was looking into. Do you know of any other good dealers in the area?

Yeah, my favorite is Cavalier, they sell Kubota, Husqvarna, Trac vac, etc. We also have Arthur's Electric and Terry's small engine.

[Church2224]

Originally Posted by Copacabana

Yeah, my favorite is Cavalier, they sell Kubota, Husqvarna, Trac vac, etc. We also have Arthur's Electric and Terry's small engine.

I live right down the road from Terry's, bought three Toro push mowers from them and my trimmer and blower. The salesman is nice but the turn around time for repairs is long. What does Arthur's carry?

Also Old Dominion Tractor I hear is good, they let me demo a Hustler Super Z and X one. Plus STI has good staff, let me demo a Turf Tracer.

[Copacabana]

Originally Posted by Church2224

I live right down the road from Terry's, bought three Toro push mowers from them and my trimmer and blower. The salesman is nice but the turn around time for repairs is long. What does Arthur's carry?

Also Old Dominion Tractor I hear is good, they let me demo a Hustler Super Z and X one. Plus STI has good staff, let me demo a Turf Tracer.

Arthur's carry Toro and Scag for mowers and still and echo for handhelds.

whats the name of your business again?

[Church2224]

Originally Posted by Copacabana

Arthur's carry Toro and Scag for mowers and still and echo for handhelds.

whats the name of your business again?

No name yet, this is just a side business for now, actually never thought I was going to do as well as I am doing now. For now I am that random kid everyone on this forum hates who is just trying to get by while he is in school. Next year I am going full time and will have a name, trailer, bigger equipment, ect.

If you see a green F150 with an Exmark 21 and a Snapper push mower in the back, chances are that is me

[Copacabana]

Originally Posted by Church2224

No name yet, this is just a side business for now, actually never thought I was going to do as well as I am doing now. For now I am that random kid everyone on this forum hates who is just trying to get by while he is in school. Next year I am going full time and will have a name, trailer, bigger equipment, ect.

If you see a green F150 with an Exmark 21 and a Snapper push mower in the back, chances are that is me

Gotcha! Good luck with everything!