The Green Industry's Resource Center

Scott Barnes · #11 11-06-2012, 05:40 PM

Got to run the blower again today, was able to save a little on fuel due to the fact of figuring out how it works. Does not have the width power the 770 had but it has more length power.

Just my two cents,

Ridin' Green · #12 11-06-2012, 06:00 PM

Quote:

Originally Posted by Scott Barnes

Got to run the blower again today, was able to save a little on fuel due to the fact of figuring out how it works. Does not have the width power the 770 had but it has more length power.

Just my two cents,

There are two different tube nozzles that you can get/have with the 802. One cuts CFM and boosts MPH, the other boosts CFM and cuts MPH.

Scott Barnes · #13 11-06-2012, 06:03 PM

Quote:

Originally Posted by Ridin' Green

There are two different tube nozzles that you can get/have with the 802. One cuts CFM and boosts MPH, the other boosts CFM and cuts MPH.

Took the bottom tube off today an like it better. Wider air volume an shorter tube.

JasonH · #14 11-18-2012, 11:18 PM

Purchased an shindaiwa EB802RT and love it. Light,powerful and releiable . It was that or a RedMax both are excellent blowers redmax seemed very bulky. Always ran shindaiwa equipment and very hard to let go the ledgend

SECTLANDSCAPING · #15 12-07-2012, 01:13 AM

I owned a 630 for about 5 years and only put in air and fuel filters so far.

I bought a 802 maybe 18 months back and really like it a lot. The only problem is someone left it behind my truck and I ran over the end tube. Anyone know where to get a end tube for it? It seems like parts are a bit harder to find.

I also run a rm 7150 no problems, rm 8000 scored cylinder and piston, and a br420 (floods, muffler needs cleaning seasonally). I got to say the shindys are my favorite because of reliability.

Ijustwantausername · #16 12-07-2012, 08:21 AM

Quote:

Originally Posted by SECTLANDSCAPING

I owned a 630 for about 5 years and only put in air and fuel filters so far.

I bought a 802 maybe 18 months back and really like it a lot. The only problem is someone left it behind my truck and I ran over the end tube. Anyone know where to get a end tube for it? It seems like parts are a bit harder to find.

I also run a rm 7150 no problems, rm 8000 scored cylinder and piston, and a br420 (floods, muffler needs cleaning seasonally). I got to say the shindys are my favorite because of reliability.

I have one of the 2 detachable pieces below the throttle in my shop for the EB802 that hasn't been used. If you want it PM me and we can work something out.