Register free!
Search
 
     

Click for Weather
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 11-07-2012, 05:04 PM
Ukisuperstar Ukisuperstar is offline
LawnSite Member
 
Join Date: Dec 2009
Posts: 16
Gunite Pool Coping

Used Unilock Brussels Block Fullnose on the beam of a gunite pool (Pool is 40yrs old). For some reason the beam is different thicknesses all around. The pool is "L' shaped with lots of straight edges, some of these edges have the coping over hanging toward the outside of the pool which will cause the ground to pop these pieces off most likely.

Have the option of cutting the stone off, but will not match around the pool. Have also heard to support the rear edge with styrofoam glued to the pool.
Will be adding an expansion joint between the coping and interlock aswell.

Any recommended solutions?
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 09:14 PM.

Page generated in 0.11436 seconds with 9 queries