Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 11-07-2012, 04:43 PM
pseudosun pseudosun is online now
LawnSite Bronze Member
 
Join Date: Jul 2009
Posts: 1,175
How tight should drive belts be on metro 36?

This thing ain't pulling too good. I believe i had a small improvement a few months back when i tightened the belt underneath by adjusting pulley. I'm talking about the wide belts on both sides on the inside of the wheels. Someone else said he hardly ever replaces those unless he has too. I'm wondering if my transmission is just wearing out, or if i could solve problem by just replacing belts. Let me know how tight those things should be.
Reply With Quote
  #2  
Old 11-08-2012, 08:31 AM
piston slapper's Avatar
piston slapper piston slapper is offline
LawnSite Platinum Member
 
Join Date: Mar 2010
Location: Tampa Fl
Posts: 4,048
If the transmission belt underneath the mower is tight...
Adjust the rods that go from the handle levers to the pulley assy..
There should be about a quarter inch of slack in the rods when fully released.
If the rods are bottoming out in the slots...the belts will not fully engage.
You may have to re adjust the brakes after you adjust the handle rods.
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough...
Do The Work
Reply With Quote
  #3  
Old 11-08-2012, 09:55 AM
pseudosun pseudosun is online now
LawnSite Bronze Member
 
Join Date: Jul 2009
Posts: 1,175
I have the rods adjusted wrong; i just happened to see that bit in the manual. I changed the spring holes. I thought the top position would have been more tension, but the manual says the bottom position is more tension. I think i just need new belts. I tightened the transmission belt. Would the tightness on new belts be alot different than old belts? For these types of belts it wouldn't seem like they'd stretch out much. This morning i'm going to try it with the springs in the changed position. The belts seem a tiny bit tighter. We'll see.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 11:24 AM.

Page generated in 0.06199 seconds with 9 queries