|
#1
|
|||
|
|||
|
dump trailer question
I was thinking about buying a 14k or 16k dump trailer. It seems that most compananys make the 14k, but when i see a 16k they say that they have 2
7k axles how is it a 16k trailer with only 14k worth of axles? Makes no sense, are they the same as a 14k but lie and sell them as 16k?http://www.texaspridetrailers.com/OS...ANDEM-AXLE.htm |
|
#2
|
||||
|
||||
|
Some trailer manufacturers are starting to figure out that you can add tongue weight to the gvw. 14000 axles + 2000 on the hitch = 1 ton extra payload. Only prob is cdl reguirements.
__________________
Kubota KX-161-3 Excavator Takeuchi TL120 CTL International 4400 Dump DT530 10 ft municipal plow 2 Toro Z-Master G3 29hp 60's Toro DFS Bagger Silverado 2500HD Hiniker 8.5 Poly V plow Monroe 8 ft Spreader Cam Superline 8 ton Tag Single axle landscape trlr Billy Goat Force blower 18 HP Vanguard Stihl Trimmers Stihl FS 550 Brush Cutter Stihl MS 441, 261, 192 saws JRCO Attachments |
|
#3
|
|||
|
|||
|
So can't u do the same wiith a 14k put 14k on the trailer and 2k on the truck? Or is it all in the way its registerd
|
|
#4
|
||||
|
||||
|
good question. IDK. Must be the reg. I just know Cam has been doing this for years and the dealer says it so you can tow more.
__________________
Kubota KX-161-3 Excavator Takeuchi TL120 CTL International 4400 Dump DT530 10 ft municipal plow 2 Toro Z-Master G3 29hp 60's Toro DFS Bagger Silverado 2500HD Hiniker 8.5 Poly V plow Monroe 8 ft Spreader Cam Superline 8 ton Tag Single axle landscape trlr Billy Goat Force blower 18 HP Vanguard Stihl Trimmers Stihl FS 550 Brush Cutter Stihl MS 441, 261, 192 saws JRCO Attachments |
|
#5
|
||||
|
||||
|
Quote:
GVWR = sum GAWR makes no sense. Nodody is lieing.
__________________
![]() Quote:
|
|
#6
|
||||
|
||||
|
Wouldn't you be over GVWR that way?
__________________
![]() Quote:
|
|
#7
|
||||
|
||||
|
depends. Do they consider that extra ton as part of the trailer or truck?
__________________
Kubota KX-161-3 Excavator Takeuchi TL120 CTL International 4400 Dump DT530 10 ft municipal plow 2 Toro Z-Master G3 29hp 60's Toro DFS Bagger Silverado 2500HD Hiniker 8.5 Poly V plow Monroe 8 ft Spreader Cam Superline 8 ton Tag Single axle landscape trlr Billy Goat Force blower 18 HP Vanguard Stihl Trimmers Stihl FS 550 Brush Cutter Stihl MS 441, 261, 192 saws JRCO Attachments |
|
#8
|
||||
|
||||
|
GVWR is GVWR.
__________________
![]() Quote:
|
|
#9
|
|||
|
|||
|
I have no clue it is confusing to me. The weight in me door jam is 9200 so i can put 16800 behind it.Right or wrong? I don't understand
|
|
#10
|
||||
|
||||
|
To me this is a grey area. I'm sure it's against manufacturer recommendations but it's not listed on the door jamb either. Here is the other thing that I understand. A fully loaded 14-16k trailer will put 1400-1600lbs of tongue weight on the hitch following the 10% guideline. Is your hitch even capable of that? Will you be over your trucks GAWR with the trailer hooked and the bed full? I finally upped to a dually just to have more wiggle room in the GVWR and GAWR and have a truck that's actually rated to tow 14,100lbs. I also upgraded the hitch from the 2" 800lb tongue 8000lb weight carrying one to a 2 1/2" 2000lb tongue 18,000lb weight carrying one. This thing is an animal compared to the stock hitch. I may be a safety nerd but a 14k bumper pull is no joke of a trailer, especially fully loaded. I admit my trailer is not always loaded to that but when it was I'm glad I had the truck for it.
|
![]() |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
|
|













Linear Mode
