Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 11-09-2012, 03:19 PM
1ATony's Avatar
1ATony 1ATony is offline
LawnSite Member
 
Join Date: Nov 2012
Posts: 35
1997 - 1999 Ford F250 Truck 4WD Rear Wheel ABS 7 Lug Wheels Front Wheel Bearing & Hub

1997 - 1999 Ford F250 Truck 4WD Rear Wheel ABS 7 Lug Wheels Front Wheel Bearing & Hub Assembly Pair

SHOP HERE:
http://www.1aauto.com/1A/wheel-beari...ampaign=1ATony




Specifications:

Driver and Passenger Side Front Pair
3 bolt flange
Direct replacement
Replaces dealer part numbers: XL3Z 1104 CB, XL3Z1104CB
Fits 7 lug wheel
Number of splines: 33
Stud size: M12 x 1.75
Wheel studs already installed
Fits 4WD vehicles with Rear Wheel ABS. F250 under 8500 GVW, F150 with 7700 GVW

Quality

1A Auto exclusive 2 Year Warranty.
If this hub bearing should fail to provide satisfactory performance you may exchange it.
You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
You don't want to be delayed by a defective part. 1A Auto hub bearings are all tested prior to shipping.

Fit guaranteed

This hub bearing will install just as your original does. You can use your existing hardware.
Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
Hub installation is a degree more difficult than changing a tire on most vehicles.
1. Jack the vehicle up and support with proper jack stands.
2. Have a helper hold the brake pedal while you loosen the Axle Shaft Nut. This usually requires a large socket (30mm or larger) and impact wrench.
3. Remove the brake caliper and brake rotor. Use string or a plastic tie to hang the caliper up and out of the way.
4. Unplug ABS sensor (if applicable)
5. Unbolt the hub flange. The hub may come free from the axle shaft easily, if not, use a gear puller or similar tool that pulls on the hub while pushing on the axle shaft. DO NOT try to drive the axle out with a hammer, this could ruin your axle CV joints.

Reverse order to install.
We were able to do a removal and replace on a GM car in about 45 minutes.

Value

Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.
__________________
Tony
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 03:45 PM.

Page generated in 0.06339 seconds with 9 queries