|
#1
|
|||
|
|||
|
replacement engine for a billy goat debris loader
I have a billy goat debris loader that has a 15 hp kawi engine that is blowing black smoke.if i replace it what would be best brand and size engine to buy?
Posted via Mobile Device |
|
#2
|
||||
|
||||
|
Not sure why you want to replace the engine...black smoke is fuel...flooding carb..
Bluish gray smoke is oil...rings or heads...
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough... Do The Work |
|
#3
|
||||
|
||||
|
Yeah, slap a $80 carb on that thing and get back to work.
|
|
#4
|
|||
|
|||
|
True it smells like its flooded like the choke is sticking
Posted via Mobile Device |
|
#5
|
|||
|
|||
|
Try a air filter too or just run it for a min without the filter on and see what happens. It worked for me and the filter didn't look all that bad.
Posted via Mobile Device |
|
#6
|
|||
|
|||
|
i agree with the air filter i blew this one out and it ran fine half the day then started smoking again
|
|
#7
|
|||
|
|||
|
Seller : deidist12 Try this guy on ebay he has alot of briggs stuff but don't know about kawi stuff.
__________________
Cheetah 61in 34hp Vride 48in 24hp SFW 36in 16hp Dixie Chopper Classic 2750 Wright Stander RH 52in 19hp Trac vac loaders and bagger Billygoat 1302sp blower Stihl handhelds 1998 Chevy 1500 Z71 with 8ft EZ dumper 2003 GMC W3500 18ft box cabover 6.5x12 landscape trailer Jrco leaf plow Part time for now and solo for now. ![]() First year into it! |
![]() |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
|
|
















Linear Mode
