Sprinkler Donut Video "Sprinkler Head Protection for Rotors and Spray Heads"

[SoCalLandscapeMgmt]

Originally Posted by Kiril

I dunno .... is your wife hot?

Not since the accident
Posted via Mobile Device

[irrig8r]

Do I understand correctly that Sprinkler Buddy is a forum sponsor? Because I sure don't see any ads... or am I not looking in the right place? (Of course, not that I want more ads, but if it helps support lawnsite...)

[mitchgo]

I'm going to go on a limb here and say... no I'm gonna stick it to the trunk of the tree and say that kiril is completely opposite to sprinklerbuddy.

[Sprinkler Buddy]

Originally Posted by irrig8r

Do I understand correctly that Sprinkler Buddy is a forum sponsor? Because I sure don't see any ads... or am I not looking in the right place? (Of course, not that I want more ads, but if it helps support lawnsite...)

I am a paid sponsor for now, I decided that I would be an active sponsor being I have worked in the green industry as a lawn care professional for many years myself. Being an active sponsor gives my product much more exposure than an image ad would have. Few, in my opinion pay little attention to the image ads.

[Kiril]

Originally Posted by SoCalLandscapeMgmt

Not since the accident

Guess I don't need a hug then.

[jvanvliet]

K...

Always a ray of sunshine.

[jvanvliet]

Originally Posted by Sprinkler Buddy

One sets and levels the head the same as they would without the Sprinkler Buddy. Part of the Buddy remains under ground and 1 to 1 1/2" of the buddy remains above ground level once it's installed.

No criticism intended here;

In my market we can't leave anything above grade. The LCO's will hack it off or tear it up in a heart beat.

Nice product, probably OK for HO's and Northern lawns; but down here, I'm not so sure.

[Sprinkler Buddy]

Originally Posted by jvanvliet

No criticism intended here;

In my market we can't leave anything above grade. The LCO's will hack it off or tear it up in a heart beat.

Nice product, probably OK for HO's and Northern lawns; but down here, I'm not so sure.

Most don't mow @ 1 1/2" or lower? It installs well below the cutting height that most of us cut at. The sprinkler head itself remains at grade level. It doesn't work if one cuts their lawn like a putting green or a fair way. When installed it's no different than the sprinkler donuts your familiar with except the Sprinkler Buddy doesn't sink in the ground over time and it prevents grass from taking root between the indicator and sprinkler head itself. Requiring much less maintenance long term.

[Wet_Boots]

It isn't the cut height. It's the deck of a mower that hits the heads.

[cjohn2000]

Well I guess the mower would trim this to height. So the scraps of green plastic are they biodegradable or have organic fertilizer to help the lawn when they get chewed up?