search sponsored by:
Advanced Search

The Green Industry's Resource Center

Thread Tools   Display Modes
Old 11-17-2012, 06:05 PM
herler herler is offline
LawnSite Fanatic
Join Date: Apr 2012
Posts: 5,146
If you take either of the old bearings...
And clean it up real good, hopefully there are still some numbers on the rubber cover that goes on the outside of the balls between the inner and the outer race, this cover is one each either side of the bearing and is there to (supposedly) keep dust out, yes it is called a dust cover.

Should be something to the effect of RS-1234
(as in letters RS followed by FOUR numbers, sometimes it's only R)
And it might be 1234-RS or some other nomenclature.
A magnifying glass tends to come in handy.

If you can read the numbers off that cover...
You can probably find your bearings, probably for under $10 the pair, with shipping.

You'll be looking for sealed ball bearings.
But you HAVE to have those numbers.

Here are some examples of what those numbers look like and why:

And you may have to take apart the good side for this to work, still I can't guarantee a readable dust cover.
The other option is to take measurements.

Guess what folks?
Extra bonus: If you paid attention you'll never again pay $50 a set for spindle bearings.

Last edited by herler; 11-17-2012 at 06:13 PM.
Reply With Quote
Old 11-18-2012, 12:03 PM
BigFish's Avatar
BigFish BigFish is offline
LawnSite Silver Member
Join Date: Jul 2008
Location: chesapeake, va
Posts: 2,460
This is what is more than likely in them wheels, and most lawn-mower carts, etc. :
What your describing is valid, no doubt, but more for spindles, and some high end s.p. mower drives, etc.
It ain't rocket science! far.

'Course if yer house has more wheels than yer truck...
" Old age ain't for sissies "
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 08:37 AM.

Page generated in 0.06128 seconds with 11 queries