Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #11  
Old 11-17-2012, 06:05 PM
herler herler is offline
LawnSite Gold Member
 
Join Date: Apr 2012
Posts: 3,225
If you take either of the old bearings...
And clean it up real good, hopefully there are still some numbers on the rubber cover that goes on the outside of the balls between the inner and the outer race, this cover is one each either side of the bearing and is there to (supposedly) keep dust out, yes it is called a dust cover.

Should be something to the effect of RS-1234
(as in letters RS followed by FOUR numbers, sometimes it's only R)
And it might be 1234-RS or some other nomenclature.
A magnifying glass tends to come in handy.

If you can read the numbers off that cover...
You can probably find your bearings, probably for under $10 the pair, with shipping.
Here:
http://www.vxb.com/

You'll be looking for sealed ball bearings.
But you HAVE to have those numbers.

Here are some examples of what those numbers look like and why:
http://www.vxb.com/page/bearings/CTG...d-Ball-Bearing

And you may have to take apart the good side for this to work, still I can't guarantee a readable dust cover.
The other option is to take measurements.

Guess what folks?
Extra bonus: If you paid attention you'll never again pay $50 a set for spindle bearings.

Last edited by herler; 11-17-2012 at 06:13 PM.
Reply With Quote
  #12  
Old 11-18-2012, 12:03 PM
BigFish's Avatar
BigFish BigFish is offline
LawnSite Bronze Member
 
Join Date: Jul 2008
Location: chesapeake, va
Posts: 1,607
This is what is more than likely in them wheels, and most lawn-mower carts, etc. :http://www.vxb.com/Merchant2/merchan...edBallBearings
What your describing is valid, no doubt, but more for spindles, and some high end s.p. mower drives, etc.
__________________
" But let me tell you something ,folks: You can't fix stupid! There's not a pill you can take, there's not a class you can go to. Stupid is forever!"

......AMF!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 02:25 PM.

Page generated in 0.07104 seconds with 10 queries