Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #191  
Old 11-25-2012, 07:28 PM
Breezmister's Avatar
Breezmister Breezmister is online now
LawnSite Bronze Member
 
Join Date: Jul 2007
Location: South Jersey
Posts: 1,179
Quote:
Originally Posted by 44DCNF View Post
Punch needs to fit closely the bore of the part being removed. Pack the hole with oil soaked wadding and tap the punch in. Pressure from behind drives the bushing or needle bearing cage out. Add more wadding as the part pushes out.
I'm just wondering if you have ever use this on the blind bearings in trimmer gearheads ? Sounds like it would work...
__________________
.
Masters Degree in Thinking Out Side Of The Box,Graduate of the MacGyver Institute of Ingenuity

The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic

RTFM What a concept

Reply With Quote
  #192  
Old 11-25-2012, 08:10 PM
44DCNF 44DCNF is offline
LawnSite Bronze Member
 
Join Date: Jul 2007
Location: Northern Illinois
Posts: 1,396
Quote:
Originally Posted by Breezmister View Post
I'm just wondering if you have ever use this on the blind bearings in trimmer gearheads ? Sounds like it would work...
I've not used it there.
Reply With Quote
  #193  
Old 11-25-2012, 08:35 PM
Richard Martin's Avatar
Richard Martin Richard Martin is offline
LawnSite Fanatic
 
Join Date: Mar 2000
Location: Greenville, NC
Posts: 14,468
Quote:
Originally Posted by 44DCNF View Post
LOL. It's used to hydraulically remove bushings or bearings from small blind holes. Such as in a starter or plow motor end cap, cam bearing, bushed shafts in gear mechanisms, needle bearings from ends of gear shafts, etc. Removing the bushing from a flywheel would be a larger example it could be used on if you were shy the proper blind hole puller.

Punch needs to fit closely the bore of the part being removed. Pack the hole with oil soaked wadding and tap the punch in. Pressure from behind drives the bushing or needle bearing cage out. Add more wadding as the part pushes out.
Just use grease. That's how I get pilot bearings out. Fill the bearing with grease. Find a socket that is the same as the inside of the bearing. Put an extension into the socket the wrong way and hit it with a hammer.
__________________
Serving Greenville, Winterville and Ayden NC


Reply With Quote
  #194  
Old 11-25-2012, 09:53 PM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,530
Quote:
Originally Posted by Richard Martin View Post
Just use grease. That's how I get pilot bearings out. Fill the bearing with grease.

Ditto.....But use my trusty Matco clutch alignment tool to pop them out.....

__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...

"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
  #195  
Old 11-26-2012, 05:29 AM
Patriot Services's Avatar
Patriot Services Patriot Services is online now
LawnSite Fanatic
 
Join Date: Jul 2006
Location: Tampa FL
Posts: 8,214
Quote:
Originally Posted by BigFish View Post
Huh?? The punch in the pic ain't no tapered drift punch!

I've tried that trick, never had too much luck with it. Tried using grease, etc., finally broke down and bought a blind ng bushing puller.
Little screen and walking at the mall. Your right not tapered.
Posted via Mobile Device
Reply With Quote
  #196  
Old 11-26-2012, 08:16 AM
piston slapper's Avatar
piston slapper piston slapper is offline
LawnSite Platinum Member
 
Join Date: Mar 2010
Location: Tampa Fl
Posts: 4,008
Try These....
The one that guesses the AGE of tool #1 gets a slab of Cyber Ribs..
Hint..5 digit patent #...
Attached Images
 
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough...
Do The Work
Reply With Quote
  #197  
Old 11-26-2012, 08:44 AM
piston slapper's Avatar
piston slapper piston slapper is offline
LawnSite Platinum Member
 
Join Date: Mar 2010
Location: Tampa Fl
Posts: 4,008
To be fair to all my fellow mobile phone users...a closer look..
Attached Images
 
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough...
Do The Work
Reply With Quote
  #198  
Old 11-26-2012, 09:17 AM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,530
Here's a try..... 17th day of 2nd month 1921, But I find it hard to believe there was something like this back then ?
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...

"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
  #199  
Old 11-26-2012, 09:22 AM
piston slapper's Avatar
piston slapper piston slapper is offline
LawnSite Platinum Member
 
Join Date: Mar 2010
Location: Tampa Fl
Posts: 4,008
Quote:
Originally Posted by Restrorob View Post
Here's a try..... 17th day of 2nd month 1921, But I find it hard to believe there was something like this back then ?
Not even in the right century...
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough...
Do The Work
Reply With Quote
  #200  
Old 11-26-2012, 09:36 AM
Breezmister's Avatar
Breezmister Breezmister is online now
LawnSite Bronze Member
 
Join Date: Jul 2007
Location: South Jersey
Posts: 1,179
Quote:
Originally Posted by piston slapper View Post
Try These....
The one that guesses the AGE of tool #1 gets a slab of Cyber Ribs..
Hint..5 digit patent #...
Number 3 is a Swiss Army Screw Driver from
before the second world war, with an awe, Philips and a
wine bottle opener. It came with the Swiss Army bike
as did # 6, Swiss Army valve tool.....
__________________
.
Masters Degree in Thinking Out Side Of The Box,Graduate of the MacGyver Institute of Ingenuity

The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic

RTFM What a concept

Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 05:01 PM.

Page generated in 0.08456 seconds with 10 queries