|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#211
11-26-2012, 10:26 PM
|
||||
|
||||
|
Quote:
Well.....I googled my dam fingers off for over a hour cuz I couldn't believe I seen 1840, And I thought 1921 was old......
__________________
Quote:
 "Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
|
|
#213
11-27-2012, 07:40 AM
|
||||
|
||||
|
Quote:
This tool was not designed as a ratchetwrench...it was just what it says..a ratchet.. The sockets were made to fit into either end...kinda bulky... Well...RestroRob...you did the work...researched the patent number.... See if I can spice up those cyber ribs and add a little flavor to them....
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough... Do The Work
|
|
#214
11-27-2012, 07:50 AM
|
||||
|
||||
|
Quote:
Its a GM factory tool....a ratcheting flarenut wrench..or a Line wrench as we call them down here.. Guess you'll have to put that cyber chinese food down ...put on your bib..and dig into a sticky rack of slow smoked BBQ Cyber ribs.. 
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough... Do The Work
|
|
#215
11-28-2012, 08:36 AM
|
||||
|
||||
|
This tool deserves a closer look...
I'm still wondering why SnapOn doesnt sell these....
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough... Do The Work
|
|
#216
11-28-2012, 08:38 AM
|
||||
|
||||
|
Do you know why these sockets were modified..???
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough... Do The Work
|
|
#217
11-28-2012, 12:07 PM
|
||||
|
||||
|
Quote:
Posted via Mobile Device
|
|
#218
11-28-2012, 01:29 PM
|
||||
|
||||
|
Looks like you guys need a hint...They could fit almost anything...
Think...DixieChopper wheelmotor...
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough... Do The Work
|
|
#219
11-28-2012, 01:56 PM
|
||||
|
||||
|
Quote:
|
|
#220
11-28-2012, 02:50 PM
|
||||
|
||||
|
The bolts on the sides of the wheelmotor are almost against the wheelmotor..
I've ground wrenches..tried crowsfoots,,,jammed a screwdriver between the nut and the motor (which actually works pretty well)...And then I butchered that socket....Bingo....
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough... Do The Work
|
 |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
