Click for Weather
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#221
11-28-2012, 05:51 PM
|
||||
|
||||
|
Quote:
Slapper...... Yer move'n a little too fast for us Ole timer's......
__________________
Quote:
 "Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
|
|
#222
11-28-2012, 06:15 PM
|
||||
|
||||
|
Quote:
I knew that you knew the answer....you speak fluent DixieChopper... Not as many Dixie techs as there used to be.... I still haven't found a good allen socket that works on all the wheelmotors...
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough... Do The Work
|
|
#223
11-28-2012, 09:27 PM
|
||||
|
||||
|
Quote:
Ahhh...... I break them loose with a standard allen wrench with a deep 1/4" socket and extension for a cheater bar, Then use a ball tip hex in my 3/8" impact wrench to run um on out..... Re-install the same way..... 
__________________
Quote:
"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
|
|
#224
11-29-2012, 07:25 AM
|
||||
|
||||
|
I thought that because SnapOn warranteed the ball allen sockets...you could just pop it on your impact or breakerbar and wrench it off....I snapped a bunch of them...
The allen socket in the pic used to be a ball end...got tired of warrantying them... The other socket in the pic was tapered to remove the bypass hose fitting between the high pressure hoses on the hydropump.. Incedentally the patent date on the RATchete according to the patent office is May 5 1857....
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough... Do The Work
|
|
#225
11-29-2012, 07:37 PM
|
||||
|
||||
|
Quote:
Let's see what we can come up with tomorrow..... 
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough... Do The Work
|
|
#226
11-29-2012, 08:02 PM
|
||||
|
||||
|
Can ya tell which one is the Polish verniers?
#1 #2 #3
__________________
" But let me tell you something ,folks: You can't fix stupid! There's not a pill you can take, there's not a class you can go to. Stupid is forever!" ......AMF!
|
|
#227
11-29-2012, 09:13 PM
|
||||
|
||||
|
Fish..... Trick question ??? It's kinda obvious since #3 has "Made in Poland" on it, Maybe you should have flipped it over.....
__________________
Quote:
"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
|
|
#228
11-30-2012, 08:52 AM
|
||||
|
||||
|
Seldom used factory tools...
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough... Do The Work
|
|
#229
11-30-2012, 10:14 AM
|
|||
|
|||
|
Crank bushing pullers and valve seat pullers.
We used to pull the seats before melting the cylinders down, now just pile them in a basket and the seats and dowels are captured and the aluminum flows back into the furnace.
|
|
#230
11-30-2012, 10:30 AM
|
||||
|
||||
|
Quote:
Hint...one is a Briggs tool...and one is a Kohler tool..
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough... Do The Work
|
 |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
