Click for Weather
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#1
11-30-2012, 09:21 AM
|
|||
|
|||
|
Briggs & Stratton ?
OK guys, here is my problem. 1 year ago I replaced the engine on my walkbehind. I replaced the old B&S engine with a new B&S engine, it is an Intek, 13.5 horsepower, I use the mower 2 times a week and it was fine until recently. The problem is I run the mower for about 1.5 hours and then it boggs down and finally cuts out, like it's out of gas. I then let it cool down for an hour and it will then run another 1.5 hours and does the same thing. I tried gasoline additive already. Any help would be appeciated. Thanks.
|
|
#2
11-30-2012, 01:32 PM
|
||||
|
||||
|
Might be a weak coil breaking down when hot..
Do the easy stuff first...Tune Up...Check valve adjustments... Not sure what kind of warranty Intek engines have on commercial walkbehinds...
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough... Do The Work
|
|
#4
11-30-2012, 10:16 PM
|
||||
|
||||
|
Quote:
^^^^^^^^^^^^^^^ Check your gas cap and make sure it's venting properly......
__________________
Quote:
 "Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
|
 |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
