Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #21  
Old 07-30-2012, 10:33 PM
Blades Lawn Maintenance's Avatar
Blades Lawn Maintenance Blades Lawn Maintenance is offline
LawnSite Bronze Member
 
Join Date: Mar 2012
Location: Baton Rouge, La
Posts: 1,233
Yeah imma have to demo a exmark and see what's up with them
__________________
“Life takes on meaning when you become motivated, set goals and charge after them in an unstoppable manner.”
*Les Brown


"There is no such thing as failure. There are only results." – Tony Robbins


Enough Said...
Reply With Quote
  #22  
Old 12-08-2012, 06:28 PM
SFS Landscaping SFS Landscaping is offline
LawnSite Member
 
Join Date: Sep 2012
Location: Garnet Valley, PA
Posts: 5
Can you post pictures of your striping kit when you get the chance?
Reply With Quote
  #23  
Old 12-09-2012, 04:04 AM
jbell36 jbell36 is offline
LawnSite Bronze Member
 
Join Date: Feb 2008
Location: KANSAS
Posts: 1,215
that's a good question...is it the striping kit that exmark offers, the roller that attaches to the deck? or is it an after market like Big League Lawns?
Reply With Quote
  #24  
Old 12-09-2012, 09:38 AM
JParisan's Avatar
JParisan JParisan is offline
LawnSite Member
 
Join Date: Jul 2012
Location: Spring city, pa
Posts: 52
I use the standard Exmark kit installed on the rear of the deck.
__________________
Combat Veteran Owned & Operated
Reply With Quote
  #25  
Old 12-09-2012, 05:32 PM
CFLS22's Avatar
CFLS22 CFLS22 is offline
LawnSite Member
 
Join Date: Mar 2012
Location: Belleville, IL
Posts: 162
Lawn Stripes

What setting is the striper set at? Because on mine I had it set low but when I would be on 3" it would make the deck bounce up whenever I would hit a bump so I moved it up one level and it just works ok now
Reply With Quote
  #26  
Old 12-17-2012, 08:32 PM
JParisan's Avatar
JParisan JParisan is offline
LawnSite Member
 
Join Date: Jul 2012
Location: Spring city, pa
Posts: 52
What setting is it on(according to the diagram in the instructions) while you cut at 3"? I always have it around a 1/4 inch off the ground. So I'll have to adjust them from time to time. I never cut below 3.25. Usually 3.5 is my standard.
__________________
Combat Veteran Owned & Operated
Reply With Quote
  #27  
Old 12-17-2012, 08:36 PM
CFLS22's Avatar
CFLS22 CFLS22 is offline
LawnSite Member
 
Join Date: Mar 2012
Location: Belleville, IL
Posts: 162
I don't really remember I think I have the lowest bolt is on the 4th setting from bottom if that sounds right? 3.5 is also my standard and I hate going lower but there's always that one customer who thinks its too tall and makes me lower deck not allowing me to have the striker lower on the 3.5" lawns
Posted via Mobile Device
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.com™ - Moose River Media
All times are GMT -4. The time now is 03:20 PM.

Page generated in 0.06886 seconds with 10 queries