Register free!


Reply
 
Thread Tools   Display Modes
  #11  
Old 12-08-2012, 10:06 AM
Illumicare's Avatar
Illumicare Illumicare is offline
Sponsor
 
Join Date: Aug 2010
Location: Serving all of N. America
Posts: 152
Color casting in photos can be extremely difficult to overcome in photography. If you take bracket white balance shots, you can layer in photoshop, and overcome some of the problems.
Also, ,most municipalities have ordinances against light trespass. If you can get the homeowner to complain (sometimes they have to complain lots!), usually you can have something done, although, even then, as Bernie mentioned, the solution is not always ideal. I complained to my municipality that the street light in front of my home was shining into my kids bedroom....they put duct tape on it!! I subsequently moved (not because of the street light), so didn't follow up on it. But, I have been on the receiving end of by-law enforcement more than once on light trespass issues when designing parking lot and roadway lighting...when pushed, they usually will act.

John Higo
__________________
Illumicare Group Limited

Providing you with the best outdoor LED lamps
designed for the Landscape Lighting Industry.

http://www.illumicaregroup.com/
Reply With Quote
  #12  
Old 12-09-2012, 07:57 PM
steveparrott steveparrott is offline
Sponsor
 
Join Date: Jun 2005
Location: Tampa, FL
Posts: 980
This is definitely a problem and I applaud those that complain to their municipalities though it seems often to be ineffective.

Regarding photoshoots. I have quite a bit of experience with this.

First, it's very difficult to color correct for HPS light in photoshop - but not impossible.

Second, on several occaisions I've used black foil to cover these lights on photoshoots and black gaffer tape to secure the foil to the fixture. I keep both items in my photo case at all times.

By the way, I also use the gaffer tape to block unwanted carriage and entry lights when needed. This tape is designed for attaching to hot lights and doesn't leave a sticky residue.

Of course, it's not easy to get up to the light to put the foil in place. Be prepared and have a long ladder ready. But be very careful, balancing a ladder against a pole can be disasterous! Don't do it unless you have two strong people holding the base. Even then, I don't (for the record) recommend it. How about a cherry picker or scissor lift - much better.

Here's a neat trick that Duncan Fuller (of CAST) came up with - attach a long string to your foil shield so when you're done, you can pull the string and the shield pops off!
__________________
Steve Parrott
Communications Director
VOLT® Lighting

813.978.3700
stevep@voltlighting.com
www.voltlighting.com



Professional Quality at a Great Price
Reply With Quote
  #13  
Old 12-10-2012, 07:45 AM
Lite4's Avatar
Lite4 Lite4 is offline
LawnSite Gold Member
 
Join Date: May 2007
Location: Indianapolis, IN
Posts: 3,018
Good tips. Thanks
__________________


Tim Ryan
Lite4 Outdoor Lighting
www.lite-4.com
Reply With Quote
  #14  
Old 12-10-2012, 09:32 PM
niteliters niteliters is offline
LawnSite Senior Member
 
Join Date: Feb 2006
Location: owensboro kentucky
Posts: 536
if it's post lights, 12-14ft high a rug has worked for us, if it's a pole light with glass lense around it, steves idea has worked for us, if its a pole light with a cupped lense...those are more difficult to cover temporarily but they are usually not as big of an issue because they are using the lense to direct the light. on occasion we have been able to locate the photo cell, illuminate it, and get the light to turn off long enough to get the shot.
__________________
chris
A.O.L.P. member
C.O.L.D. (Certified Outdoor Lighting Designer)#1112
C.L.V.L.T. (Certified Low Voltage Lighting Technician)#0639
Reply With Quote
  #15  
Old 12-14-2012, 01:28 AM
The Lighting Geek's Avatar
The Lighting Geek The Lighting Geek is online now
LawnSite Senior Member
 
Join Date: Oct 2007
Location: Fair Oaks, California
Posts: 838
I have used a metal trash can painted flat black, temporarily for a photo shoot before. The trash can worked to make the photo cell turn the light off. I have also used a rug too.
__________________
Tommy Herren, CLVLT #1169
Member of AOLP, CA chapter
www.thelightinggeek.com

Battling the Forces of Darkness Everywhere
Reply With Quote
  #16  
Old 12-14-2012, 03:32 AM
1idejim's Avatar
1idejim 1idejim is online now
LawnSite Fanatic
 
Join Date: Jul 2009
Location: State of Jefferson
Posts: 6,993
Use a cloth tarp attached to a swimming pool leaf skim and vac pole.

You guys with the ladders and tape are lucky not to have been locked up, street lights are for public safety.
Posted via Mobile Device
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.com™ - Moose River Media
All times are GMT -4. The time now is 05:43 AM.

Page generated in 0.06289 seconds with 9 queries