Click for Weather
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#341
12-10-2012, 06:56 PM
|
||||
|
||||
|
Quote:
Knew id seen that impact before... I was a bench tech for the Skil PowerTool Factory Service Center back in the Reagan years.. 
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough... Do The Work 
|
|
#342
12-10-2012, 07:12 PM
|
||||
|
||||
|
I bought it off an independent tool guy/truck back in 1972 when I was wrenchin' on Mazda rotaries. It's a heavy little sucker! I do believe its time to put in the vane/rebuild kit, though. It seems to have lost some oomph!
__________________
" But let me tell you something ,folks: You can't fix stupid! There's not a pill you can take, there's not a class you can go to. Stupid is forever!" ......AMF!
|
|
#343
12-10-2012, 08:16 PM
|
||||
|
||||
|
Quote:
But WTF it was wrong!!!!! Check this out: That attachment is the other feature that made the " Imp" unique! Which is why I bought it. It came in real handy for changing the plugs on Mazda rotary engines, back in the day. You could index the attachment completely around the head of the gun. Cool, huh?
__________________
" But let me tell you something ,folks: You can't fix stupid! There's not a pill you can take, there's not a class you can go to. Stupid is forever!" ......AMF!
|
|
#344
12-10-2012, 08:46 PM
|
||||
|
||||
|
Quote:
https://www.kimballmidwest.com/Catal...6.618.122.4436
|
|
#345
12-11-2012, 06:08 AM
|
||||
|
||||
|
Quote:
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough... Do The Work
|
|
#346
12-11-2012, 02:53 PM
|
||||
|
||||
|
Quote:
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough... Do The Work
|
|
#347
12-11-2012, 05:30 PM
|
||||
|
||||
|
Quote:
How many times have you struggled to get all the gaskets, shields, spacers, carb, carb linkage& springs, and air filter box assembled on a pi$$ a$$ Honda engine????? Well make ya a pair of these bolts to assemble everything! Slide everything in place then pull one out at a time and install yer bolt. These are honda carb bolts w/o the head, but I made an even better (longer) set from a Kaw. carb mounting bolt.
__________________
" But let me tell you something ,folks: You can't fix stupid! There's not a pill you can take, there's not a class you can go to. Stupid is forever!" ......AMF!
|
|
#348
12-11-2012, 07:04 PM
|
||||
|
||||
|
I think RestroRob is on his way to the NorthPole to give Santa his annual pep talk...
Good idea on the Honda carb alignment pins...though you probably won't end up with as many free breather gaskets...
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough... Do The Work
|
|
#349
12-12-2012, 09:09 AM
|
||||
|
||||
|
25000 plus hits...
Thanx to all the folks that kept this thread interesting..
A round of Cyber Ribs for everyone...there's plenty to go around..
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough... Do The Work
|
|
#350
12-12-2012, 09:12 AM
|
||||
|
||||
|
Name That Tool.........Engine Builder Huh...???
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough... Do The Work
|
 |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
