|
|
|
|
|
#31
12-24-2012, 08:46 AM
|
||||
|
||||
|
Quote:
No computer bud. Mobile device  There is clearly at least 6" of base in the bottom left of the pic. There is sand covering it up. The sand you see is on top of the base. There is a portion of a shadow and the sand has been walked on making it hard to tell. At least 8-inches. But if you actually take the time to look at the picture, you know - the time you spent typing miserable comments - you would see this. But your mind is clouded with attempting to be as nasty as you can. You can see there is plenty of aggregate and then the shadow starts and we have walked on the excess sand, what do you think the base just suddenly stopped where the shadow is?! Amazing. Have a GREAT holiday And may 2013 be a terrific year for you and your family. Posted via Mobile Device Last edited by DVS Hardscaper; 12-24-2012 at 08:56 AM. 
|
|
#32
12-26-2012, 12:41 PM
|
||||
|
||||
|
Quote:
I'm not sure when, but we will be installing a 1,890 SF patio sometime this winter. For the most part it's rectangular in shape, no curvey radiused outter perimeters and borders. BUT there will be just under 2 full days of cutting pavers! The patio is boxed in. Meaning one side is the dwelling, and the other 3 sides are retained by a huge retaining wall. So we will have mitering on all 4 sides (yes there will be mitering required along the dwelling for existing logistical site conditions.) Not to mention the multiple deck posts. In the middle of the patio will be something like 48-linear feet of NDS's Dura Slope drain boxes that will be flush with the pavers. Just mitering the pavers to fit around the drain will easily take 2 guys 6 hours (12 MH). And to top things off - at this stage in the project we won't be able to run the saw close to where we're working because it will get dust all over the pavers and house! So this means the saw must be stationed at least 50-feet away from the furthest end! No matter how one tries to spin it, no matter how big one's Wacker is - There simply is no Smart Phone App that can/will speed up paver cutting. (plate compactor that is) .
__________________
"It's You vs. You" "People Throw Rocks At Things That Shine" My Equipment Brag List: -1 CAT hat -16 pairs of Hanes socks (the Heavy Duty model), many with holes. -12 pairs of underwear, ranging from Joe Boxers to Jockey, many are in need of replacement. (no more photo requests please) -hundreds of t-shirts. Some w/ grease stains, some torn & tattered. -7 pairs of jeans, ranging from Levis to Polo to GAP. 1/2 of them have holes in 'em. -1 belt -1 pair of old worn out Nike shoes. Last edited by DVS Hardscaper; 12-26-2012 at 12:46 PM.
|
|
#36
12-27-2012, 02:57 PM
|
||||
|
||||
|
Quote:
Do faster cutting blades come with a bigger carberator, performance pipe, silencer, and run on CAM2 race gas? Posted via Mobile Device
|
|
#38
12-27-2012, 05:49 PM
|
||||
|
||||
|
Quote:
It looks like you have about 2'+ of base extending past the right side, I figured the walkway moved more left then expected... and wheres that GEOtextile hanging out of the sides?!?
|
|
#39
12-27-2012, 06:09 PM
|
||||
|
||||
|
Quote:
All our jobs have not one, but two layers of fabric. The first layer under the aggregate is usually way greater than needed, never less than needed. After the base installation is completed, lines are painted for where the pavers will go, and the 2nd layer is cut to go within the lines, wasting very little, and exposing very little past the sand When you work with me - you learn to become very diligent and you learn that I am very specific with no room for nonsence.You more than welcome to check out my website and attend a paver installation seminar in an area near you: www.andrewhardscape.com/fanclub/seminartour . .
__________________
"It's You vs. You" "People Throw Rocks At Things That Shine" My Equipment Brag List: -1 CAT hat -16 pairs of Hanes socks (the Heavy Duty model), many with holes. -12 pairs of underwear, ranging from Joe Boxers to Jockey, many are in need of replacement. (no more photo requests please) -hundreds of t-shirts. Some w/ grease stains, some torn & tattered. -7 pairs of jeans, ranging from Levis to Polo to GAP. 1/2 of them have holes in 'em. -1 belt -1 pair of old worn out Nike shoes. Last edited by DVS Hardscaper; 12-27-2012 at 06:19 PM.
|
 |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
