Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 12-29-2012, 06:04 PM
LawnMan19's Avatar
LawnMan19 LawnMan19 is offline
LawnSite Gold Member
 
Join Date: Dec 2011
Location: Where I need to be
Posts: 3,238
Exmark Turf Tracer 48''

Hey, I need some advice could anyone tell me how to disengage the hydros on a Turf Tracer to be able to move it without running the engine or damaging the hydros.
Thanks
__________________
'' hard workers never slack and slackers never work hard.''
Reply With Quote
  #2  
Old 12-29-2012, 07:49 PM
LawnMan19's Avatar
LawnMan19 LawnMan19 is offline
LawnSite Gold Member
 
Join Date: Dec 2011
Location: Where I need to be
Posts: 3,238
Anyone????
__________________
'' hard workers never slack and slackers never work hard.''
Reply With Quote
  #3  
Old 12-29-2012, 08:00 PM
RodneyK RodneyK is offline
LawnSite Senior Member
 
Join Date: Jul 2009
Location: Fort Wayne, IN
Posts: 636
I think there is a nut on the hydros to turn that releases them.
__________________
Reply With Quote
  #4  
Old 12-29-2012, 08:01 PM
LawnMan19's Avatar
LawnMan19 LawnMan19 is offline
LawnSite Gold Member
 
Join Date: Dec 2011
Location: Where I need to be
Posts: 3,238
Quote:
Originally Posted by RodneyK View Post
I think there is a nut on the hydros to turn that releases them.
Thanks a lot man.
__________________
'' hard workers never slack and slackers never work hard.''
Reply With Quote
  #5  
Old 12-29-2012, 08:31 PM
sjessen sjessen is online now
LawnSite Bronze Member
 
Join Date: Jul 2004
Location: Knoxville, Tn
Posts: 1,579
Yes, as stated above, each pump has a dump valve which looks like a nut on a bolt on the back of the bump. Loosening that will relieve the pressure. When retightening be careful to avoiding getting them too tight.
Reply With Quote
  #6  
Old 12-29-2012, 08:41 PM
LawnMan19's Avatar
LawnMan19 LawnMan19 is offline
LawnSite Gold Member
 
Join Date: Dec 2011
Location: Where I need to be
Posts: 3,238
Quote:
Originally Posted by sjessen View Post
Yes, as stated above, each pump has a dump valve which looks like a nut on a bolt on the back of the bump. Loosening that will relieve the pressure. When retightening be careful to avoiding getting them too tight.
Thank you very much, I know their had to be something but had no clue. I appreciate it a lot man
__________________
'' hard workers never slack and slackers never work hard.''
Reply With Quote
  #7  
Old 12-29-2012, 08:42 PM
sjessen sjessen is online now
LawnSite Bronze Member
 
Join Date: Jul 2004
Location: Knoxville, Tn
Posts: 1,579
You are quite welcome!! Glad to be of some help.
Reply With Quote
  #8  
Old 12-29-2012, 08:48 PM
LawnMan19's Avatar
LawnMan19 LawnMan19 is offline
LawnSite Gold Member
 
Join Date: Dec 2011
Location: Where I need to be
Posts: 3,238
Quote:
Originally Posted by sjessen View Post
You are quite welcome!! Glad to be of some help.
You're a great help, now I don't need to spend a whole day trying to figure it out.
__________________
'' hard workers never slack and slackers never work hard.''
Reply With Quote
  #9  
Old 12-29-2012, 09:02 PM
RodneyK RodneyK is offline
LawnSite Senior Member
 
Join Date: Jul 2009
Location: Fort Wayne, IN
Posts: 636
http://www.exmark.com/pdfs/4500-358.pdf

Page 18, drive wheel release valves upper right hand column.
__________________
Reply With Quote
  #10  
Old 12-29-2012, 09:05 PM
LawnMan19's Avatar
LawnMan19 LawnMan19 is offline
LawnSite Gold Member
 
Join Date: Dec 2011
Location: Where I need to be
Posts: 3,238
Quote:
Originally Posted by RodneyK View Post
http://www.exmark.com/pdfs/4500-358.pdf

Page 18, drive wheel release valves upper right hand column.
Damn your good man.
Thanks
__________________
'' hard workers never slack and slackers never work hard.''
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 02:45 AM.

Page generated in 0.08348 seconds with 9 queries