The Green Industry's Resource Center

Prev Previous Post   Next Post Next
Old 01-11-2013, 06:43 PM
etap etap is offline
LawnSite Member
Join Date: Dec 2010
Location: louisville,ky
Posts: 13
I thought that I knew something about compression test

First, You have to make sure the gauage is good. I started off with 2 cylinder Kaswasaki engine,and check compression.The left side was reading 140psi and the right side was reading 175psi. The book said to set both INT. EXH. 0.004- 0.006 so I set the left side to 0.005 and check compression, and now it reading 90psi. so I check th setting on the other cylinder, and it was 0.13 Int .045 on the exhaust. So I set the left side to match and it is 180psi I am really confused. If I do it to the book it will 90psi .Is it that compression ACR doing it to me.THX
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Grand View Media
All times are GMT -4. The time now is 06:25 PM.

Page generated in 0.07087 seconds with 9 queries