Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 12-01-2012, 03:39 PM
johnnybravo8802 johnnybravo8802 is offline
LawnSite Silver Member
 
Join Date: Apr 2008
Location: Ga.
Posts: 2,210
What's the verdict on the new JD 910?

I've never used JD on a regular basis but was looking at a package deal today that included a new JD 910 and was wondering what the verdict was on this mower. It had a 48" deck with a 22 kawi. I think the configuration would be sufficient but was wondering how a mulch on demand deck would work with that mower or if you have to step up to a 920 to even have that option? Thanks.
__________________
Reply With Quote
  #2  
Old 12-01-2012, 05:57 PM
Ridin' Green Ridin' Green is offline
LawnSite Fanatic
 
Join Date: May 2011
Location: Michigan
Posts: 8,706
The 910 is actually 20.5 HP. The 22 number was under the old rating system. The MOD isn't an option on a 910. You'd need to step up to the 920 to get a MOD, and only the 48" MOD is available on the 920. I believe the 910 with the 48" deck is fine for normal cutting, but it will starrt to lack power if the grass is wet and or thick and there are any hills involved at all.

A lot of guys on here have bought them and replaced the throttle plate with one from a 920 which is the only true difference between those two engines. It's about a $40 part and an hour or so of your time to do. There's a thread in the mechanic & repair forum if you do a search on it there.
__________________
Quote:
Originally Posted by Darryl G
I can also tell by looking back to see how they're hanging and often reach back and feel them to see how firm they are.
Reply With Quote
  #3  
Old 12-01-2012, 08:16 PM
johnnybravo8802 johnnybravo8802 is offline
LawnSite Silver Member
 
Join Date: Apr 2008
Location: Ga.
Posts: 2,210
Quote:
Originally Posted by Ridin' Green View Post
The 910 is actually 20.5 HP. The 22 number was under the old rating system. The MOD isn't an option on a 910. You'd need to step up to the 920 to get a MOD, and only the 48" MOD is available on the 920. I believe the 910 with the 48" deck is fine for normal cutting, but it will starrt to lack power if the grass is wet and or thick and there are any hills involved at all.

A lot of guys on here have bought them and replaced the throttle plate with one from a 920 which is the only true difference between those two engines. It's about a $40 part and an hour or so of your time to do. There's a thread in the mechanic & repair forum if you do a search on it there.
Yea, I thought I had read on the JD website that the MOD is only available on the 920. That would be a nice option to have, especially around apartment complexes, but I'd prefer the 26HP option with that feature. It seems most people on here agree that more HP is better while mulching. Thanks for the input.
__________________
Reply With Quote
  #4  
Old 12-01-2012, 08:38 PM
Ridin' Green Ridin' Green is offline
LawnSite Fanatic
 
Join Date: May 2011
Location: Michigan
Posts: 8,706
I run a Z950 with a 60" MOD. It has more than enough power for the MOD, but yea, more is always better for mulching, no doubt.

The MOD is far better with OEM wavy mulching blades than it is with the std high lifts for all around cutting. Several of us here run our MOD's like that and have been quite happy with them set up that way.
__________________
Quote:
Originally Posted by Darryl G
I can also tell by looking back to see how they're hanging and often reach back and feel them to see how firm they are.
Reply With Quote
  #5  
Old 12-01-2012, 08:46 PM
johnnybravo8802 johnnybravo8802 is offline
LawnSite Silver Member
 
Join Date: Apr 2008
Location: Ga.
Posts: 2,210
Quote:
Originally Posted by Ridin' Green View Post
I run a Z950 with a 60" MOD. It has more than enough power for the MOD, but yea, more is always better for mulching, no doubt.

The MOD is far better with OEM wavy mulching blades than it is with the std high lifts for all around cutting. Several of us here run our MOD's like that and have been quite happy with them set up that way.
Definitely agree about the OEM's. I've used OEM's on my Scag TT in regular side discharge mode and they made a difference, in the fall. The MOD would be nice for me because I've ranged from mowing a retirement community with bermuda sod one day to a 30 acre industrial plant with two weeks of growth the very next day. It's tough to find one machine that can do it all.
__________________
Reply With Quote
  #6  
Old 12-02-2012, 09:19 AM
rungreen rungreen is offline
LawnSite Member
 
Join Date: Jan 2010
Location: cabery, illinois
Posts: 148
Have had 22hp 910 54' deck for years. 300 plus hours, great mower, enough power. Only downtime was broken deck belt.
Reply With Quote
  #7  
Old 12-03-2012, 04:11 PM
DA Quality Lawn & YS's Avatar
DA Quality Lawn & YS DA Quality Lawn & YS is offline
LawnSite Fanatic
 
Join Date: Sep 2007
Location: Rochester, MN
Posts: 7,984
Quote:
Originally Posted by Ridin' Green View Post
The 910 is actually 20.5 HP. The 22 number was under the old rating system. The MOD isn't an option on a 910. You'd need to step up to the 920 to get a MOD, and only the 48" MOD is available on the 920. I believe the 910 with the 48" deck is fine for normal cutting, but it will starrt to lack power if the grass is wet and or thick and there are any hills involved at all.

A lot of guys on here have bought them and replaced the throttle plate with one from a 920 which is the only true difference between those two engines. It's about a $40 part and an hour or so of your time to do. There's a thread in the mechanic & repair forum if you do a search on it there.
A 20.5 hp engine on a 48" deck reg mowing will not lack power - I run that same combo now.
__________________
7x14 Stealth SE Enclosed with 48" side ramp
08 Toro Z400 48" deck, 21HP Kaw with EZ Vac twin bag
09 Exmark Turf Tracer HP 36"
21" Toro SR4 Super Recycler
Stihl KM90 Kombi w/ straight shaft trimmer & tiller heads
Husqvarna 125B Blower
PG Magnum
Turfco XT5 Aerator
Turfco LS-22 Overseeder
EcoLawn 200 Applicator

I can do all things through Him who gives me strength.
Philippians 4:13
Reply With Quote
  #8  
Old 12-03-2012, 04:18 PM
Ridin' Green Ridin' Green is offline
LawnSite Fanatic
 
Join Date: May 2011
Location: Michigan
Posts: 8,706
Quote:
Originally Posted by DA Quality Lawn & YS View Post
A 20.5 hp engine on a 48" deck reg mowing will not lack power - I run that same combo now.
There's several of guys on here (especially in the HO forum) who own a 910 and many of them would disagree with you, and have done so already in other threads. With the size of the pumps and the weight of the machine itself, it's getting close on power on flat ground in thick wet grass, but it should be OK.

Like I said above, but add in any hills at all, and it's gonna be underpowered a bit. You can't accuratelycompare what your Toro will do to what the 910 will do unless everything is identical weight, deck design, blades, pumps etc.
__________________
Quote:
Originally Posted by Darryl G
I can also tell by looking back to see how they're hanging and often reach back and feel them to see how firm they are.
Reply With Quote
  #9  
Old 01-14-2013, 11:54 PM
rmslawns's Avatar
rmslawns rmslawns is offline
LawnSite Member
 
Join Date: May 2009
Location: Youngsville NC
Posts: 161
I have a 2010 Z920 54" with a mulch kit on it. ( not a MOD, just a fulltime kit). 26 HP with no issues mulching fescue in any condition. Bermuda I always cut in the afternoon when dry and it handles it fine. Also have a mulch kit on a Hustler trimstar 48". Cuts great as well.
Reply With Quote
  #10  
Old 01-15-2013, 08:57 AM
Roger Roger is offline
LawnSite Fanatic
 
Join Date: Dec 1999
Location: McMurray, PA
Posts: 5,811
I have a 717A, 48" 7Iron deck, with a 19hp Kaw. I do no mulching, but do use a chute blocker for leaf work in the Fall. In normal cutting, I use standard OEM hi-lift blades.

99% of the time, the 19hp is enough power. Only when I have a long upward slope do I sense I need to pull back a bit on the sticks. All my cutting is cool weather, northern grasses. Sometimes in the Spring, the growth is heavy, and wet. But, I don't find the 19hp a problem, only a bit of a challenge from time to time.

However, having said that, I wonder if a 22hp engine would burn less fuel. I get about 6.5 service hours, out of the 8 gallon full tank of gasoline (1.2 gal/hr). I think this is high on fuel usage. My 15hp Kohler Command Pro, single cylinder, driving my w/b will burn about 0.65 gal/hr.

In general, I do not run hard. Only in a very few instances am I running more than 70% full speed, usually about 4mph. My properties are too rough to run faster. I know I cannot control my machine like I want at faster speeds. My body thanks me for running slower than full speed.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 12:09 PM.

Page generated in 0.07158 seconds with 9 queries