Prev Previous Post   Next Post Next
Old 01-15-2013, 09:22 PM
Lite4's Avatar
Lite4 Lite4 is offline
LawnSite Gold Member
Join Date: May 2007
Location: Indianapolis, IN
Posts: 3,079
Question on Nightscaping transformer

So I pulled out an old 1000 watt, Nightscaping transformer out of my attic that I took off of a job a couple years back. I am installing some lights out behind my house in my back trees. I figuired I would use this transformer but I am running into an issue and just wondered if any of you have seen it. I pulled all the old 25 amp fustats, and replaced them with 20 amp ones to have fresh ones in there (it's all I could find at Lowes). I hooked up my runs, but only the runs on the C and D lugs lit up. I pulled out my meter and tested all the lugs. When I turn off A and B all of the terminal colored voltage blocks seem to work as they should. When I turn ON A and B the blue and yellow lugs read 25 volts. The runs on A and B do not light up (although A and B lugs do register Voltage at the lugs.) Kind of strange, says I. It's dark and I am inside now, so I will have to check it out further tomorrow sometime, but thought I would send this out to see if any of you have any thoughts.


Tim Ryan
Lite4 Outdoor Lighting
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Grand View Media
All times are GMT -4. The time now is 09:25 AM.

Page generated in 0.06545 seconds with 9 queries