Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 01-19-2013, 08:12 PM
anrick anrick is offline
LawnSite Member
 
Join Date: Dec 2007
Location: Nassau Bahamas
Posts: 38
Bob-cat hydraulic oil resevoir

After noticing slow movement with my bob-cat 52" lawnmower i said its probably time to change the hydraulic oil, when i remove the reservoir cap and drain the oil i noticed some buildup at the bottom of the tank so i decided to wash it out. While doing this one on the hose lines becomes block so i tried to clear it with a piece of stiff copper wire and come to find out it wont go through at all, its as if something on the inside of the tank stopping it, do these reservoir normally come fitted with additional items on the inside maybe an additional filter. any help would be great.
The model is 942214E 2005
Reply With Quote
  #2  
Old 01-21-2013, 10:29 AM
pugs pugs is offline
LawnSite Silver Member
 
Join Date: Jun 2006
Location: Southwest of Chicago
Posts: 2,769
There could be 90's or some other fittings after the nipple on the tank. One of the hoses hooks up to the filter which is on the side of the tank somehow. I never paid much attention to an empty tank as to how those fittings come in.

How do you know one of the lines is blocked?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 01:19 PM.

Page generated in 0.06204 seconds with 9 queries