The Green Industry's Resource Center

Thread Tools   Display Modes
Old 01-22-2013, 02:17 PM
KYMan KYMan is offline
LawnSite Member
Join Date: Apr 2012
Location: Central Ky
Posts: 57
Need some in put on LARGE weed whacking job

I am putting in a bid at a local factory but need some input from you guys first. The whole property is 9 acres....2 acres of it is hillside that is not only too steep too mow but also too rough with rocks and wash outs. The maintenance manager has already expressed his desire to have it mowed but it's just not possible. He wants it mowed/trimmed down 2-3 times a year. So not only would the incline and roughness make it impossible, you would be crawling in 3 foot high weeds.

How long would it take you guys to weed whack a 2 acre hillside? I just got done measuring this ditch that I do a couple times a year and it is 4000 sq/ft and it takes me an hour. At that rate, that's a 22 hour job. I think charging for those hours will cause me to lose the bid. Should it be fewer hours or more? Just wondering how fast you guys can do it.
Reply With Quote
Old 01-22-2013, 02:30 PM
LawnSite Senior Member
Join Date: Jan 2013
Location: Morgantown WV and surounding areas.
Posts: 394
Sounds like your customer is throwing the book at you for wants and just seeing what all they can get out of you. You will need help with this trimming job and you should bill for your time , if you are a solo op and cannot get help , you may have to break the trimming into sections and do it in the evening throughout one week , break it into 3 or 4 sections and do it this way if you really want the account and can get the money to justify 4 trips to a site other wise 4 guys on a trimmer one visit , But regardless how you actually physically do it , time is money and if they will not pay have them get some one else , my opinion at least , these big trimming accounts can really make you miserable and sometimes are better to just walk away from them if you can't get the money for them. I would try to break up the bid , one for the mowing job you actually want then the hillside this gives them the option to hire you for one and not the other if budgett does not permit. just my opinion though , hope it helps.
Reply With Quote
Old 01-22-2013, 02:30 PM
LandFakers's Avatar
LandFakers LandFakers is offline
LawnSite Fanatic
Join Date: Aug 2011
Location: CT
Posts: 6,156
Need some in put on LARGE weed whacking job

Well I have never done a job that big for weed whacking, but if you can do 4000sq in an hour, you have to factor in refuel time and everything else. If its going to take you 22 hours then bid it at 22 hours. Don't lessen your rate just to get the work
Reply With Quote
Old 01-22-2013, 02:40 PM
highlander316 highlander316 is offline
LawnSite Senior Member
Join Date: Oct 2004
Location: Easton, PA
Posts: 317
how steep exactly? We do one twice a year. It's just over an acre. At some parts, it's so steep that you are almost guaranteed to slip down. During the first whacking in late June, all the foliage is thick and growing (loaded with water, and about 60-70% of the area has an underlying ground cover of poison ivy). It takes longer to cut. Takes two guys about 6-6.5 hours. During the second whacking in mid-late November, most everything is dead/dormant so it goes faster. Closer to 4-4.5 hours. The key is whack it as low as possible each time, makes it easier on following whackings.
GM trucks, Scag & Yazoo/Kees mowers, Shindaiwa, Redmax
Reply With Quote
Old 01-22-2013, 02:43 PM
frady5454 frady5454 is offline
LawnSite Member
Join Date: Dec 2007
Location: western nc
Posts: 7
Need some in put on LARGE weed whacking job

I have a property similar to that one and it takes a four man crew about 4.5 hours to do the job. Really steep terrain and we only weed eat it 4 times a year. The bank that we do is 2 acres as well. The spring cut is the worst and takes a tad bit longer.
Hope that helps
Reply With Quote
Old 01-22-2013, 02:46 PM
KrayzKajun's Avatar
KrayzKajun KrayzKajun is online now
LawnSite Fanatic
Join Date: Oct 2006
Location: Harvey,LA
Posts: 10,586
Sub it out and get someone to spray it.
Posted via Mobile Device
Reply With Quote
Old 01-22-2013, 02:52 PM
rlitman rlitman is online now
LawnSite Bronze Member
Join Date: Sep 2009
Location: Long Island
Posts: 1,384
Not that I know anything about this (I'm the first to admit when I'm out of my element), but wouldn't a power scythe make the job easier/faster? Just tossing up an idea. . .
I'd go at it with my angled pole hedge clippers. It won't chop up all the growth, just lays it down, but you can cut down a whole lot more than a string, in a whole lot less time.
Reply With Quote
Old 01-22-2013, 02:56 PM
Swampy's Avatar
Swampy Swampy is offline
LawnSite Bronze Member
Join Date: Aug 2006
Location: Montello, WI
Posts: 1,439
Use a brush cutter head on the end of a heavier weed eater, the String just won't cut it you'll go threw a ton and not get very far vs just using a blade which will be faster.

The few brush cut jobs I did do, I was at about 45/hour, and the KM 90 did good threw the fleshy green material and the extremely soft woods (sumac's) but kind of struggled with harder wooded material (buckthorn, black walnut, and black locust).
Landscape Engineering Service
US Army 996th EN Co

Picture Thread:
Reply With Quote
Old 01-22-2013, 03:11 PM
KYMan KYMan is offline
LawnSite Member
Join Date: Apr 2012
Location: Central Ky
Posts: 57
Yeah I know I'll be using a brush cutter head as string would just be wasting my time. By the several responses that I have already read, so....20-22 hrs is actually a pretty good estimate on how long it will take then.. And I just bought a new FS100 too dangit. Won't be able to use it b/c it won't accept a blade. I'll get a new FS110 too I reckon....may sell the 100...has less than 4 hours on it probably.

Never thought about the spraying but wouldn't that lead to erosion? I also have a pull behind mower for my ATV that I have considered using but at such a slow speed given the height of the grass, I don't think it would hold the hill going upwards, definitely not across the hill....flip over in a heartbeat.
Reply With Quote
Old 01-22-2013, 03:32 PM
grandview (2006)'s Avatar
grandview (2006) grandview (2006) is offline
LawnSite Gold Member
Join Date: Jan 2006
Location: Lancaster N.Y.
Posts: 3,479
Sell a trimming job,then sell them a growth regulator app.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Grand View Media
All times are GMT -4. The time now is 06:29 PM.

Page generated in 0.09040 seconds with 10 queries