Register free!


Reply
 
Thread Tools   Display Modes
  #1  
Old 01-23-2013, 09:20 AM
Mikegyver Mikegyver is offline
LawnSite Bronze Member
 
Join Date: Jan 2010
Location: Longview TX
Posts: 1,803
What to charge for testing backflow devices

What should I be charging to test a backflow device? We don't have many PVBs around here, mainly RPs and DCs. I was thinking 100.00 per inch of diameter on RPs or DCs. Or is that too high? I realize this can vary depending on what state/region you are in. I need to test one at a dentist's office this week. The guy that used to do it was charging like 75.00 or 80.00.
Mike
__________________
High end commercial, multi-family and residential lawn care, irrigation (LI and BPAT), and landscaping.
Mikegyver Pics Thread
Reply With Quote
  #2  
Old 01-23-2013, 09:24 AM
AI Inc's Avatar
AI Inc AI Inc is online now
LawnSite Fanatic
 
Join Date: Dec 2007
Location: Southern NH
Posts: 22,072
$100 an inch sounds resonable.
__________________
Reply With Quote
  #3  
Old 01-23-2013, 09:24 AM
GrunderIrri's Avatar
GrunderIrri GrunderIrri is offline
LawnSite Member
 
Join Date: Mar 2010
Location: Miamisburg, Ohio
Posts: 28
most plumbers in my area(you have to be a licensed plumber)charge 85 - 115
__________________
CIC, CLIA, EPA WaterSense Partner. And working on my CID
Reply With Quote
  #4  
Old 01-23-2013, 09:45 AM
Mikegyver Mikegyver is offline
LawnSite Bronze Member
 
Join Date: Jan 2010
Location: Longview TX
Posts: 1,803
This place must have an RP (since its medical related) and I'm assuming its a 1" and I'm thinking she told me the guy that used to do it charged 75.00. I told her for this time I'd come pretty close to his price but next year it will be 100.00 a inch.
__________________
High end commercial, multi-family and residential lawn care, irrigation (LI and BPAT), and landscaping.
Mikegyver Pics Thread
Reply With Quote
  #5  
Old 01-23-2013, 10:59 AM
koster_irrigation koster_irrigation is offline
LawnSite Bronze Member
 
Join Date: Aug 2003
Location: Wilson, NC
Posts: 1,369
In small town pricing ive seen low ballers that are testers "by hobby" that test at 60 to 70 bucks.

Normal professional prices are 75 - 85 to 125 up to 2" beyond 2" is usually by the inch for fire lines etc.
you better have ALOT of insurance when testing firelines, ive thought 3 million in insuracnce and an umbrella would be a good start....

I usually try to get 85 to 95 per valve 2" or less. Thats if were doing the irrigation maintenace on the site. I'll also always try to round up and other valves that are associated with that site and test them as well to increase revenue. If i have to travel to test just one valve i charge accordingly
__________________
NC Irrigation Contractors License #157
NC Licensed Plumbing Contractor #32636

Since 1994

https://www.facebook.com/pages/Koste...c/284215458045

Last edited by koster_irrigation; 01-23-2013 at 11:05 AM.
Reply With Quote
  #6  
Old 01-23-2013, 12:32 PM
Wet_Boots's Avatar
Wet_Boots Wet_Boots is online now
LawnSite Fanatic
 
Join Date: Mar 2005
Location: metro NYC
Posts: 40,648
price by the inch? - no way, what with some 1/2-inch devices out there
Reply With Quote
  #7  
Old 01-23-2013, 12:38 PM
AI Inc's Avatar
AI Inc AI Inc is online now
LawnSite Fanatic
 
Join Date: Dec 2007
Location: Southern NH
Posts: 22,072
I dont beleive ive ever seen a 1/2 in that I didnt rip off and replace.
__________________
Reply With Quote
  #8  
Old 01-23-2013, 12:46 PM
Wet_Boots's Avatar
Wet_Boots Wet_Boots is online now
LawnSite Fanatic
 
Join Date: Mar 2005
Location: metro NYC
Posts: 40,648
Quote:
Originally Posted by AI Inc View Post
I dont beleive ive ever seen a 1/2 in that I didnt rip off and replace.
Why? They're out of the mainstream, but at $200 and up for the little RPZs, it doesn't hurt to possess repair capability.
Reply With Quote
  #9  
Old 01-23-2013, 01:57 PM
AI Inc's Avatar
AI Inc AI Inc is online now
LawnSite Fanatic
 
Join Date: Dec 2007
Location: Southern NH
Posts: 22,072
Because selling a BF that I payed $56 for for $156 is one of the reasons I chose this industry.
__________________
Reply With Quote
  #10  
Old 01-23-2013, 02:43 PM
SoCalLandscapeMgmt SoCalLandscapeMgmt is online now
LawnSite Bronze Member
 
Join Date: Sep 2007
Location: So. Cal.
Posts: 1,534
Let's see.... I just recieved the invoice from the tester for one of my commercial properties that I own. It looks like I paid $50 each for seven 1" RP devices and $60 for the big 8" double check fire supply and another $60 for the bypass on that 8" device. I paid a total of $470 for testing 9 devices. This guy is one of the bigger testing companies in So. Cal. he has 4 or 5 guys in trucks testing devices all day long so his prices may be a little lower than others
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 05:47 PM.

Page generated in 0.07115 seconds with 10 queries