Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 01-22-2013, 04:04 PM
excel excel is offline
LawnSite Member
 
Join Date: Jan 2013
Posts: 9
Production Rates

Alright, I Have searched this site, and goggle.

Vander koi has been recommended to me, I've tried to order it, even called the firm, no return calls.

Im trying to build a quoting system for my new company. I don't want to eye-ball it. I'm currently working on getting my overhead calculated, but need some help in the production rate department. Would any of you have some numbers I could use for

-Mowing (I have a 52" exmark ZTR with ultravac, and a 52" Wright Stander)
-Weed Wacking
-Mulch Spreading (I use 250sqft to a Yard?) How long does it take to spread?
-Bed Edging
-Hedge trimming
-Fuel consumption


I know you big guys have this info. If you don't want to share publicly Would one of you be so kind as to PM me some of your production rates? At the very least you'll be helping to assure that another Low-baller doesn't flood the market!

Thanks
Reply With Quote
  #2  
Old 01-23-2013, 03:22 PM
excel excel is offline
LawnSite Member
 
Join Date: Jan 2013
Posts: 9
Don't Everyone jump up at once.

i'm going to guess that no one has production rates available? I'm not quite sure how you bid without them?

Could someone perhaps at least point me in the right direction? I really just need the raw data here. Id go out and mow my yard and time it, but I haven't put the snow tires on my Exmark yet...


Anyone?
Reply With Quote
  #3  
Old 01-23-2013, 04:08 PM
grassmasterswilson grassmasterswilson is online now
LawnSite Gold Member
 
Join Date: Mar 2007
Location: nc
Posts: 3,431
Trial and error

Best way is to figure your cost and hourly rate. Then time yourself for each service you are asking about.

A great please to start is your personal home, parents, friends etc. time yourself, measure the fuel used, etc.
__________________
GrassMasters, LLC
Wilson, NC
www.grassmasterswilson.com
Reply With Quote
  #4  
Old 01-23-2013, 04:15 PM
excel excel is offline
LawnSite Member
 
Join Date: Jan 2013
Posts: 9
This is certainly something I will be doing come spring. Id just like to see if anyone had some rough numbers that I could play around with until my sampling pool is large enough to be relevant.
Reply With Quote
  #5  
Old 01-23-2013, 04:30 PM
jrs.landscaping's Avatar
jrs.landscaping jrs.landscaping is online now
LawnSite Silver Member
 
Join Date: Mar 2012
Location: Maine
Posts: 2,428
The only ones I can help you with production is mulch and edging. We can put down 4.6 yards per hour and I can usually edge 5 lin. ft. per min.

I don't run 52" mowers so

Trimming depends on what you are trimming or how you are trimming
(vert vs. regular.)

On the trimming, are you boxing, shaping, or just cutting back?

Our basic fuel consumption is .76 GPH for Walkers and 1.13? for our Deere's.
__________________
Reply With Quote
  #6  
Old 01-23-2013, 05:38 PM
grass-scapes's Avatar
grass-scapes grass-scapes is offline
LawnSite Bronze Member
 
Join Date: Apr 2003
Location: Greensboro NC
Posts: 1,554
Its also going to depend on your meaning of bed edging and other terms.
Do you mean bed edging after its trenched? With a string trimmer, I can probably bed edge 75 ft in a minute. If you mean trenching, well, then with the Brown I can do 20 ft a minute and with the echo handheld, I can do about 5 ft min.

I have a formula for calculating how many sq ft I can cut in an hour with a particular mower, but I can't find it at the moment. Ive posted it on here before, so you may be able to find it that way.

Mulch depends on the people. I can usually get 2 people to do 2 yards each per hour, but that depends on how far to haul it, time of day, day of week,temperature,etc.

I guess what Im trying to say, you will never get any more than kinda close.
__________________
By the time you can make ends meet....They move the ends.
_________________________
Grass Scapes
Greensboro NC
Reply With Quote
  #7  
Old 01-23-2013, 07:54 PM
gallihergreen's Avatar
gallihergreen gallihergreen is offline
LawnSite Gold Member
 
Join Date: Dec 2012
Location: Research Triangle, NC
Posts: 3,878
Get out the stopwatch.
Posted via Mobile Device
Reply With Quote
  #8  
Old 01-23-2013, 08:51 PM
BradLewisLawnCare BradLewisLawnCare is offline
LawnSite Senior Member
 
Join Date: Mar 2011
Location: Albany NY
Posts: 279
hedge trimming... I can do about 20 small bushes trimmed in an hour with the long handled stihl trimmers. With the handheld I would have a tougher time with it. The hand held requires more movement and thus I'd say maybe 10 per hour. Cleanup is easier in bulk but add yourself in an hour or two depending how close they are from your truck location. I am getting $15 for bushes under 6 feet from root base and $25 from 6-12 ft. Then up from there depending how dangerous it seems and accessibility.
Reply With Quote
  #9  
Old 01-24-2013, 04:27 AM
Kings of Green LLC Kings of Green LLC is offline
LawnSite Member
 
Join Date: May 2012
Posts: 146
How many ft per minute of sidewalk can you guys edge with a stick edger?
Posted via Mobile Device
Reply With Quote
  #10  
Old 01-24-2013, 09:25 AM
Efficiency's Avatar
Efficiency Efficiency is offline
LawnSite Bronze Member
 
Join Date: Apr 2011
Location: zone 6
Posts: 1,117
Quote:
Originally Posted by jrs.landscaping View Post
4.6 yards per hour
How many men in that hour? No way you are referencing a man hour prod rate.
Posted via Mobile Device
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 12:36 PM.

Page generated in 0.07017 seconds with 9 queries