The Green Industry's Resource Center

Ridin' Green · #**541** 10-19-2012, 01:11 AM

Quote:

Originally Posted by SwatDawg15

I wish they made the G6 for the Exmark 56 Triton. I have the 3 n 1 blades and they do great, but the G6 really plowed threw the thick stuff on my other machines.

Are your 3-1 blades the regular version or the 3-1 high lifts? Mine are the 3-1 high llifts and I can see no difference ion the way they perform from my G6's.

SwatDawg15 · #**542** 10-19-2012, 01:17 AM

Quote:

Originally Posted by Ridin' Green

Are your 3-1 blades the regular version or the 3-1 high lifts? Mine are the 3-1 high llifts and I can see no difference ion the way they perform from my G6's.

Maybe I do have the regular? Just by eyeballing them today they did not look like they had as much lift as my G6 blades.

Ridin' Green · #**543** 10-19-2012, 01:25 AM

Like I said to darryl, mine are the exact same height at the end lift tab, and at the tips of the fingers when laying next to each other on my benchtop. I don't have a pic, but maybe I can get one tomorrow if time allows. If you read the specs on the Oregon site you can see the lift for any given blade, and the 3-1's HL's are the same or slightly higher than the G6's, which is 1/14" with some 3-1's running 1 3/8".

stonebridge · #**544** 11-03-2012, 05:05 PM

has anybody used G6 on a ferris zero turn 61'' old style deck. i have a chance to buy a ferris derby 61'' 27hp kohler with 500 hours for $2200
but want to know if it helps with the clumping in the morning due or if the decks clump bad in the morning dew

cpllawncare · #**545** 11-03-2012, 11:57 PM

I went to buy some G6's for my GS's and found they don't make them, hmm that sucked I really wanted to try a set.

trooper8870 · #**546** 11-04-2012, 12:05 AM

Do they make the G6 mulching gator blades for the Hustler VX4 deck?

Scott's Lawn Maintenance · #**547** 11-04-2012, 12:05 PM

Would running the g6 blades with my ultra vac put to much strain on the engine (23hp kawasaki engine)?
Posted via Mobile Device

Bulldogz · #**548** 01-25-2013, 03:22 PM

Quote:

Originally Posted by Oregon OEP

The production group tells me around September they should be available for the Cub Cadets.

Dennis any update on this? I ask because I saw some discontinued that may work (part #96-401), no?

Oregon OEP · #**549** 01-25-2013, 03:32 PM

Quote:

Originally Posted by Bulldogz

Dennis any update on this? I ask because I saw some discontinued that may work (part #96-401), no?

The 96-401 would be the blade and it is available.

Valk · #**550** 01-25-2013, 04:17 PM

Dennis, can you tell me who might have a pair of G5s - #596-310 - in stock so I can order them? These are 16.25" with a 5/8" hole.

AES in KC needs to order 10 to make it worth their while...and I'd like to just try 1 or 2 pairs to see if I'll like them.