Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 01-30-2013, 04:17 PM
locallawncare.ca locallawncare.ca is online now
LawnSite Senior Member
 
Join Date: Oct 2012
Location: Ontario
Posts: 700
Billy Goat TR1104 with Pirahna Shredder

Hello everyone, I recently acquired a used TR1104, and was wondering if the new piranha shredder blade would fit on this model? I seems to have enough clearance, if anyone has done this to this model or a similar older BillyGoat without the piranha it would be greatly appreciated. Its currently winter up here in Canada so I cant really test out the shredding performance until fall, thanks again.
__________________
Reply With Quote
  #2  
Old 02-01-2013, 09:38 AM
Mr. Force™, Billy Goat Industries's Avatar
Mr. Force™, Billy Goat Industries Mr. Force™, Billy Goat Industries is offline
Sponsor
 
Join Date: Jan 2006
Location: Lee's Summit, MO
Posts: 492
It could work but we never tested for it here on the TR to HTR series and coming from the factory I cannot recommend it. It's been done successfully but I know it's been done unsuccessfully as well.

Here's the main thing to look out for. Assuming there's clearance you must be VERY careful that there's no weld slag on the top on the impeller hub before installation. If there is, the Piranha could rotate causing the screw that holds the impeller on to the impeller to loosen or over-tighten (depends on what the slag does). Either way you lose your crankshaft if you don't figure it out in short order. The bottom of the Piranha MUST be completely flush with the top of the impeller hub. There's no warranty if it's not done right so you're swinging without nets.
__________________
Drew Coates, AKA Mr. Force
Reply With Quote
  #3  
Old 02-01-2013, 11:16 AM
locallawncare.ca locallawncare.ca is online now
LawnSite Senior Member
 
Join Date: Oct 2012
Location: Ontario
Posts: 700
Thanks for the valuable information Drew, I'm wondering in your opinion do the new Loaders shred far better then the model i have? TR1104 compared to a new similar model. Thanks again.
__________________
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.com™ - Moose River Media
All times are GMT -4. The time now is 08:44 PM.

Page generated in 0.06518 seconds with 9 queries