some mods i did on my z spray.. post yours!

[rcreech]

Ahhhhh...the good ol days of fighting about who had the best machine.

LOL

[Falcon50EX]

rcreech no its about what has others done that may make my job easier.

A 25gal Aux add on from LT Rich with a stand alone agitation pump. I am missing about 7 connectors to finish the job.

[Falcon50EX]

more pictures to come once I get the fittings

[CHARLES CUE]

Thats nice your going to spray for a long time

Are we going all liquid / Can you put the spreader back on in short order or is this perament

Good luck with your project keep up the good work

Charles Cue

[Falcon50EX]

Originally Posted by CHARLES CUE

Thats nice your going to spray for a long time

Are we going all liquid / Can you put the spreader back on in short order or is this perament

Good luck with your project keep up the good work

Charles Cue

This is just for Pre-M. I am going to put some quick disconnects on all the lines so then all I will have is 6 bolts to remove the tank and reinstall the hopper.

[kbrashears]

That's sweet. Also: I forgot what a clean Z looked like! Mine looks like big bird currently with all the pre.

[Falcon50EX]

Originally Posted by kbrashears

That's sweet. Also: I forgot what a clean Z looked like! Mine looks like big bird currently with all the pre.

Aluminum Brightener from NAPA. I have the number 2 machine made for 2011.

[ArTurf]

Here is something I want to add to my Z. I have the extra 7 gal tank I use for gly. I currently have it hooked to a boomless nozzle on the center of the boom & also a wand on the hose reel. I would like to add a single nozzle on the end of the boom to spray the cracks in parking lots. I know the nozzle needs to be angled slightly forward. Any thoughts on how to accomplish this?

[kbrashears]

Originally Posted by ArTurf

Here is something I want to add to my Z. I have the extra 7 gal tank I use for gly. I currently have it hooked to a boomless nozzle on the center of the boom & also a wand on the hose reel. I would like to add a single nozzle on the end of the boom to spray the cracks in parking lots. I know the nozzle needs to be angled slightly forward. Any thoughts on how to accomplish this?

I did this. But I put my nozzle at the end of my boom so I could get next to retaining walls and such. I just replaced my coil wand with some 3/8ths hose and a rigged up 1/4 nozzle.

[ArTurf]

Originally Posted by kbrashears

I did this. But I put my nozzle at the end of my boom so I could get next to retaining walls and such. I just replaced my coil wand with some 3/8ths hose and a rigged up 1/4 nozzle.

Can you post a pic.