Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 02-06-2013, 12:50 PM
Construct'O's Avatar
Construct'O Construct'O is offline
LawnSite Bronze Member
 
Join Date: Mar 2006
Location: Sw Iowa
Posts: 1,373
Mower attachmnet with narrow mounting plate info

Bought a Loftness flail mower attachment 48" cut that has a smaller mounting plate on it then standard skid is now.In the model number it had ASV.

So i was thinking does it fit like the ASV 30 skid???? Do they have a narrower mounting plate.Measure around 40", standard plate i think is closer to 45".

I bought this to mount on my mini(50D),was new never used,but has some age.Paint faded a little.Will have too build a mount for it.Is set up for skid now and will try leaving it so can use on skid or the mini.

Price was right,so don't figure i have much to lose.It has the T shaped knifes on it.It has a roller at the rear and is not as open as the factory mini US mower.48" might be a load ,but like i said priced right!

Main question now what was it made to fit on?What other skid uses the small plate?Was thinking that is why it didn't sell,and has been setting around so long.Will try to get some pictures.
Reply With Quote
  #2  
Old 02-06-2013, 02:04 PM
Digdeep Digdeep is offline
LawnSite Bronze Member
 
Join Date: Dec 2005
Location: Madison, WI
Posts: 1,760
If it says ASV I'm sure its for the RC30. They had a smaller coupler.
__________________
Digdeep
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 12:09 PM.

Page generated in 0.06194 seconds with 9 queries