stripe kit

[jones68]

who is running a stripe kit on their walkbehinds? if you do what brand are you using? I have 2 exmark metros that i want to put stripe kits on but the ones i have seen stick out behind the frame and i am worried that i would trip over them when making turns and maneuvering the machine around.

[GMLC]

My stripe kit is just a rubber strip mounted to the back of the deck. Cost me $75 but I bet you could make your own much cheaper.
Posted via Mobile Device

[Kkane97]

This is what i have used for 2 years now, 2 pvc end caps, i think it was 4" pvc pipe, drill nuts bolts, scrap steel and sand. Just bolts to the back of the mower doesn't interfere with my sulky and works great
EDIT: I just realized these picture were before I shortened the red arms

[jones68]

yes that is similar to what i am seeing online i do not use a sulky i walk so that would interfere. I like the rubber idea do you have any pictures or website that shows it?

[show-n-go]

There is a few threads on here for how to build a really good one. if your lazy like me you can buy one from http://bigleaguelawns.com/ But like i said there are posts on here for how to build a striper just like the big league lawns one.

[LandFakers]

I built my own striper basically identical to the big league striper ones. If you want some infor ill through up some. you can get the idea of what I built from this http://bigleaguelawns.com/

[LandFakers]

Heres how I did it http://www.lawnsite.com/showthread.php?t=358378

[jones68]

yes i have seen this type and on a zero i think it would be great but im worried about tripping over it when im walking behind the machine do you guys run these on your walk behinds or just zeros

[jones68]

thanks for the input guys

[LandFakers]

Originally Posted by jones68

yes i have seen this type and on a zero i think it would be great but im worried about tripping over it when im walking behind the machine do you guys run these on your walk behinds or just zeros

I only have mine on a zero...