Register free!

The Green Industry's Resource Center



 
 
Thread Tools   Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 02-10-2013, 12:01 AM
pjm123a pjm123a is online now
LawnSite Member
 
Join Date: Jul 2008
Location: FL
Posts: 119
Got to do some work today in between helping my son with his motorcycle. I have changed the oil and oil filter in the engine. I got a new hydro oil filter, put some oil in it and on the seal and screwed it on. I installed the main pulley. Put some anti-seize lubricant on it and it went on pretty easy. I put some blue loctite on the set screws. I also installed the electric clutch. The pulley and the clutch were from the donor motor. I started it up and the pulley spins smoothly. Have not yet put any load on anything or tried the clutch. I have also started working on the seat. I have parts form 3 different seats. Between the 3 I hope to build a useable seat. I am starting with the seat mounting plate from the burned mower because it is the straightest. The cushions will come from the donor mower. Hopefully they will look a little better on some straighter metal parts.
Attached Images
     
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.com™ - Moose River Media
All times are GMT -4. The time now is 04:41 AM.

Page generated in 0.27915 seconds with 9 queries