|
#1
|
|||
|
|||
|
NPR Diesel--landscape body
I just bought a 1997 isuzu npr landscape body with a drive on ramp for zero turns. Is it possible to flip the mower when going up the ramp? It seems like my front tires are barely touching the ramp when I drive it up. When I back it down slowly my rear bumper on my zero trun scraps the ground. Are these beds all the same on the trucks. It seems pretty steep going up and makes me very nervious
when I see the tires start to lift as I am leaning forward. |
|
#2
|
||||
|
||||
|
Will depend on ramp length and height of bed...
__________________
--------------------------------------------------- ~ cut it high ~ let it fly ~ --------------------------------------------------- Some folks are so contrary that if they fell into a river, they'd insist on floating upstream. ~ Josh Billings |
|
#3
|
||||
|
||||
|
NPR Diesel--landscape body
Mine is pretty steep, I was nervous at first but haven't had any problems. The rear bumper on my mower does not scrape though.
|
|
#4
|
||||
|
||||
|
Pics?
Posted via Mobile Device |
|
#5
|
||||
|
||||
|
NPR Diesel--landscape body
Back it on ?
|
|
#6
|
||||
|
||||
|
NPR Diesel--landscape body
Maybe gate is a little short?
__________________
98 Cummins 12v 4x4 97 F250 gas 95 Chevy 1500 52'' Hydro Turf Tracer 60'' Lazer Z 3 Stihl Weedeaters Stihl Br 380 and 2 Br 600s Stihl Ms 170 Chainsaw Stihl Hl 100 Pole Hedge Trimmers Stihl Hs 45 Hedge Trimmers 5x8 Trailer 6.5x16 Trailer
|
|
#7
|
||||
|
||||
|
NPR Diesel--landscape body
You can always take it to a trailer manufacturer and have them lengthen it. They can make it as long as you want
|
|
#8
|
||||
|
||||
|
Gate must be short. Different companies make different beds for the back. I have no problems with mine
Posted via Mobile Device |
|
#9
|
||||
|
||||
|
lengthen the ramp and add a few weights to the front of your mower
__________________
|
|
#10
|
|||
|
|||
|
By the way, where would be a good place to find one of these types of landscape trucks?
|
![]() |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
|
|











Linear Mode
