Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #27  
Old 02-14-2013, 07:12 PM
GaryBK GaryBK is offline
LawnSite Member
 
Join Date: Jul 2012
Location: Canada
Posts: 119
I make my own injection guns for twin hose. I use a regular chemlawn gun and put a brass fitting on it that I drill a small hole into. I then tap it and thread on an L fitting into which I thread a brass hose barb to 1/4" then I give the whole thing a quick solder. My injection valve is a trigger valve about. 3' from the gun. I even put a small piece of hose between my fitting and the gun so I get a swivel in there at the gun to make it easiest to untwist the hose. I've been doing that for 20 years. Works great. And for pumps I just use 12 volt surflo pumps with pressure switches. Under $200 and I have figured that they last between 5000-10000 lawn sprays.
Posted via Mobile Device
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 06:22 PM.

Page generated in 0.17680 seconds with 9 queries