Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #11  
Old 02-17-2013, 12:23 AM
SwatDawg15's Avatar
SwatDawg15 SwatDawg15 is offline
LawnSite Member
 
Join Date: Apr 2011
Location: Louisiana, Mississippi
Posts: 89
Rustoleum Hammered Black. Apply directly over rust. No primer or sanding needed. It works, and it holds up very well.
Reply With Quote
  #12  
Old 02-17-2013, 01:04 AM
Holland's Avatar
Holland Holland is offline
LawnSite Senior Member
 
Join Date: Jan 2013
Location: Mississippi
Posts: 542
Thanks. I like the hammered rustoleum I did flashings on my roof with it.
Posted via Mobile Device
Reply With Quote
  #13  
Old 02-17-2013, 09:13 AM
CFLS22's Avatar
CFLS22 CFLS22 is offline
LawnSite Member
 
Join Date: Mar 2012
Location: Belleville, IL
Posts: 162
Helpful info on painting a lawn care trailer??

Just simply wire wheel the entire trailer to get scratches in old paint knocked down but focus on the rust first before your wire gets worn down. Then use your sand paper to smooth any major thing down and prime using a simple spray can. I then used can of black rustoleum and painted it on with those cheap foam brushes because it doesn't leave streaks. Both of my trailers I did this to turned out fantastic and didn't take much effort. Also I used a paint stripper that attaches to a power drill and it worked pretty good, probably better than the wire wheel. I think it was made by 3m
__________________
-Truck
Ram 1500 Quad Cab
-Trailer
14ft Open Trailer
8ft Open Trailer
-Mowers
Ferris DD 52"
Exmark Vantage 52"
Exmark TT 52"
Exmark Phazer 34"
-Trimmers
3 Stihl FS90R's
Stihl HS45
TroyBilt Stick Hedge Trimmer
-Blowers
3 Husqvarna 150BT's
Reply With Quote
  #14  
Old 02-18-2013, 10:31 AM
jones68 jones68 is offline
LawnSite Senior Member
 
Join Date: Sep 2012
Location: Frostburg, Maryland
Posts: 403
Last time I did mine I took it to a local metal fab place had them sandblast it cost me $100 well worth it. Primed with rustoleum then I used the farm tractor and implement enamel from tractor supply. I put the hardener in it. In was and still am very impressed with the results. I used an hvlp gun for all the primer and paint did it outside had a few bugs in it but nothing you would notice
Posted via Mobile Device
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 02:26 PM.

Page generated in 0.06787 seconds with 10 queries