Go Back   LawnSite.comô - Lawn Care & Landscaping Business Forum, Discuss News & Reviews > Sponsor Forums - Discuss with Sponsors Directly > Lawn Mowing Equipment & Accessories * * * * SPONSOR FORUMS > Hustler Turf Equip
User Name
Password
Home Products Find a Dealer News About Us Contact Us Mark Forums Read


Hustler Turf Equip Lawn Mowers & Turf Care Equipment

Reply
 
Thread Tools Display Modes
  #1  
Old 02-18-2013, 08:02 PM
LILLYLE LILLYLE is offline
LawnSite Member
 
Join Date: Feb 2013
Location: Prairieville, La
Posts: 2
Replacing Hustler Z Drive Belt??

My drive belt popped. I went to the dealer and bought a replacement belt. Tried putting it on this afternoon and it seems to be a bit short. Can't get it onto the pulleys. I checked the belt # I bought to the one in the manul and its correct. Maybe I'm doing something wrong. Does anyone have any tips on getting the belt on the pulleys?

Thanks
Lyle
Reply With Quote
  #2  
Old 02-18-2013, 09:25 PM
Landrus2's Avatar
Landrus2 Landrus2 is offline
LawnSite Platinum Member
 
Join Date: Dec 2006
Location: Big apple
Posts: 4,693
Have you matched it to the old one
Reply With Quote
  #3  
Old 02-19-2013, 08:50 AM
LILLYLE LILLYLE is offline
LawnSite Member
 
Join Date: Feb 2013
Location: Prairieville, La
Posts: 2
Can't really match them up side by side because the old one is popped and shredded a bit. Looks to be about the same.
Reply With Quote
  #4  
Old 02-19-2013, 04:29 PM
Mickhippy's Avatar
Mickhippy Mickhippy is offline
LawnSite Gold Member
 
Join Date: Feb 2003
Location: Queensland, Australia.
Posts: 3,921
Im assuming the Z is pretty much the same as the SZ...
There are holes for the tow hitch. Put some heavy string or thin rope through one of the holes and around the idler pulley or arm and bring rope back out another hole. Use the holes that line up best. Pull on the rope and it should make getting the belt over the idler pulley much easier.
Reply With Quote
  #5  
Old 02-20-2013, 12:14 AM
hustlermidwest hustlermidwest is offline
Sponsor
 
Join Date: Sep 2012
Location: Chicago, Ill
Posts: 602
correctly done. that is the reason for the 1/2 square cut out to allow the breaker bar to pull back the idler. It does sound a little tight though.

Brian O
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:31 PM.

Forum Rules:

This hustlerturfequipment.com sponsored forum is administrator monitored. LawnSite.com does not allow any manufacturer competitor attacks and will strongly enforce this. If you want your discussion to be viewable by the public and responded to in a professional manner then please keep your discussions professional and to the point.

All discussions are viewed by the administration before being released to the public. Your post may not be made viewable for up to 48 hours. Please allow the manufacturer representative enough time to respond to your question or comment once made viewable.

LawnSite.com is not affiliated with the Excel Hustler company. This forum is provided by LawnSite.com to Excel Hustler in order to better server their customers


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
Lawnsite,  Plowsite, WeldingWeb, LawnCareSuccess, Everythinggreen, & Lawnbusiness.net are trademarks of Lawn Care Success, Inc

Page generated in 0.05881 seconds with 9 queries