Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 02-21-2013, 04:37 PM
locallawncare.ca locallawncare.ca is online now
LawnSite Senior Member
 
Join Date: Oct 2012
Location: Ontario
Posts: 680
Homemade Tire Cage(trimmer trap tc-3)

Just a couple pictures of the tire cage I made, I was gonna buy them from trimmer trap but the price made me reconsider, so anyways I built one for a Toro 22156 and will make another. I'm gonna use it in my truck bed, to hold my mowers so they can be one in front of the other without fumbling with bungees/straps or having them rolling around. I used to just turn one sideways at the rear and then secure it to the anchors in the truck bed, but with two it becomes a pain. Hope this helps someone thinking of buying one or something similar. I am also in no way a fabricator of any kind, don't have a welder, I used a blow torch, vice, hammer, drill, nuts and bolts. I am also gonna use a large plastic wing nut thingy to tighten it and slide it up/down, so it can be easily secured by hand, just didn't have one.
Attached Images
     
__________________
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 12:13 AM.

Page generated in 0.08722 seconds with 9 queries