Click for Weather
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#1
02-26-2013, 09:22 PM
|
||||
|
||||
|
Dump Dogg plastic insert weight?
Sold my bri mar insert in the fall. I got sick of it being back there all the time and it needed paint. I do miss it somewhat though. Just curious what the plastic poly ones weigh. I think my bri mar was 800.
__________________
Kubota KX-161-3 Excavator Takeuchi TL120 CTL International 4400 Dump DT530 10 ft municipal plow 2 Toro Z-Master G3 29hp 60's Toro DFS Bagger Silverado 2500HD Hiniker 8.5 Poly V plow Monroe 8 ft Spreader Cam Superline 8 ton Tag Single axle landscape trlr Billy Goat Force blower 18 HP Vanguard Stihl Trimmers Stihl FS 550 Brush Cutter Stihl MS 441, 261, 192 saws JRCO Attachments 
|
|
#2
02-26-2013, 10:19 PM
|
|||
|
|||
|
Im curious to this as well. And also as to how well they hold up! I dont mind putting a fresh coat of paint on a dump insert each year, but the plastic/polyetheline and aluminum seem to be a better choice for the payload advantage. And they look nicer.
__________________
 Insured and Licensed
|
|
#3
02-27-2013, 06:16 PM
|
|||
|
|||
|
Ithink the weight is very close to the same
|
|
#4
02-27-2013, 07:27 PM
|
||||
|
||||
|
Ya I was afraid of that. The only weight I could find was the shipping weight on northern tool catalog, 1000 lbs. Thats one of the main reasons I got rid of the steel one. In a gas truck the mpg and power is noticable. Not drastic but noticable. Of course pay load is a factor too.
__________________
Kubota KX-161-3 Excavator Takeuchi TL120 CTL International 4400 Dump DT530 10 ft municipal plow 2 Toro Z-Master G3 29hp 60's Toro DFS Bagger Silverado 2500HD Hiniker 8.5 Poly V plow Monroe 8 ft Spreader Cam Superline 8 ton Tag Single axle landscape trlr Billy Goat Force blower 18 HP Vanguard Stihl Trimmers Stihl FS 550 Brush Cutter Stihl MS 441, 261, 192 saws JRCO Attachments Last edited by 4 seasons lawn&land; 02-27-2013 at 07:34 PM.
|
 |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
