Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 03-08-2013, 11:31 AM
birddseedd birddseedd is offline
LawnSite Bronze Member
 
Join Date: Jan 2012
Location: Kalamazoo MI
Posts: 1,912
What to do to flush my hydro oil

My wheel motor went out, not from contaminates or anything, the shaft simply broke. So thankfully in this case replacing the pump is not needed. However if I do not get the system clean it will be necessary.

So here is my question. how do i get all the oil out and get the system clean.

I had to remove the wheel motor to move the mower, since then its been sitting. but its been sitting with the two hoses disconnected. I will start by removing the hoses and pouring new oil threw them. after this is done and I replace the old motor, how do i flush the whole system and replace all of the oil? I could remove the hoses and run the system but that will not get the oil out of the motor.

thanks for the help
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 05:57 PM.

Page generated in 0.08415 seconds with 8 queries