Register free!


Reply
 
Thread Tools   Display Modes
  #11  
Old 03-11-2013, 10:38 PM
1idejim's Avatar
1idejim 1idejim is online now
LawnSite Fanatic
 
Join Date: Jul 2009
Location: State of Jefferson
Posts: 7,035
Quote:
Originally Posted by 1idejim View Post
512hz can be used to locate the 60hz buzz of power lines using the receiver only. 512hz is a telephone rack signal. That is a signal transmitted from the CO.

8k will work if you use null rather than peak mode. The vertical orientation of the solenoid is the easiest explaination i can give you.

33 and 65 bleed too easy and don't travel well on small conductors. They also tend to cancel through xtalk.
Posted via Mobile Device
I should have mentioned that you could be locating the path inductively if you ground the far end. That is what the 33 and 65k are good for.

As a rule lower goes farther, higher goes deeper.

When using a 521 or pro800 the lower the power output the farther the signal goes.
Posted via Mobile Device
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 11:27 PM.

Page generated in 0.05056 seconds with 10 queries