The Green Industry's Resource Center

Greg78 · #21 03-12-2013, 09:36 PM

Those racks look similar to what I've been using for years with no problems. TG2000 seems like the only place I can find them anymore is eBay.
http://www.ebay.com/itm/New-TG2000-T...item53f0c90ae2

Less than $65 with free shipping, can't beat em.

Greg78 · #22 03-13-2013, 02:33 PM

If you wanted to cut on your new rack the following photo shows you where you need to cut out metal to get latch to open up all the way. Photo is my TG2000 rack that I started using in 2008 and still in use today as seen in photo. Note I did not have to cut on my rack this is how it came.

Greg78 · #23 03-13-2013, 02:39 PM

Shows TG2000 open.

Holland · #24 03-13-2013, 03:22 PM

I need some racks for my trailer and don't want to spend a lot of cash. So the tg2000 is a good choice? No spinning around etc?
Posted via Mobile Device

Greg78 · #25 03-13-2013, 03:25 PM

Quote:

Originally Posted by Holland

I need some racks for my trailer and don't want to spend a lot of cash. So the tg2000 is a good choice? No spinning around etc?
Posted via Mobile Device

Mine don't spin unless I really jolt the trailer around. I've seen others wrap the latch with tape like J&A Lawn Care did and that really locks them in.

J&A Lawn Care · #26 03-14-2013, 01:26 PM

My problem has be resolved and I have a set of those racks also and had a problem with mine spinning so as you can see on the 1st page of pictures I took some clack tape and wrapped around the rack that closes on the handle and it want budge now

Greg78 · #27 03-14-2013, 01:56 PM

Quote:

Originally Posted by J&A Lawn Care

My problem has be resolved and I have a set of those racks also and had a problem with mine spinning so as you can see on the 1st page of pictures I took some clack tape and wrapped around the rack that closes on the handle and it want budge now

So how was your problem resolved?

jdo150 · #28 03-14-2013, 09:29 PM

I have rackem racks I just alternate the trimmers so middle one is the opposite of the top and bottom and then they come out easy
Posted via Mobile Device

jones68 · #29 03-14-2013, 09:32 PM

Installed the xtreme trimmer rack didn't get to the blower racks today... Easy install very well built and strong easy to use... I will try and get some pictures up over the weekend
Posted via Mobile Device

NLCofColorado · #30 03-27-2013, 01:51 AM

Its really not that hard to fix. Just cut the metal where the hinge hits. Does anyone even use those locks that come with it lol

wow those TG2000 are Cheap. Would of bought those if i saw them before