Advanced Search

The Green Industry's Resource Center

Prev Previous Post   Next Post Next
Old 03-16-2013, 02:15 AM
ricky86 ricky86 is offline
LawnSite Bronze Member
Join Date: Aug 2008
Location: Monmouth Cty N.J.
Posts: 1,620
There's a brown wire that comes from the key switch. It goes to the start relay. The start relay must be activated or the pump won't work.(It completes the ground on the coil side of the relay). The brown wire goes to the circut side of the start relay. When activated, the relay switchs voltage to the blue wire, which in turn goes to the starter sol, which activates it. Trace those wires(brown and blue) from the switch to the POST on the sol. Key switch has to be in the start position. If you have voltage to the start relay's brown wire and not to the blue, and the terminals are intact, good chance it's the relay. Don't match the relay. They look the same but some have a different amp rating. All the info is on the relay. You have to check one circut at a time, and perform a voltage drop test on each. That's the best way to check for dirty , corroded connections. Or would you like to continue the Toro bashing with a dealer that's trying to help you?
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Grand View Media
All times are GMT -4. The time now is 04:28 AM.

Page generated in 0.28902 seconds with 9 queries