Register free!
Search
 
     

Click for Weather
Reply
 
Thread Tools Display Modes
  #11  
Old 03-30-2013, 10:16 AM
MEXANDME MEXANDME is offline
LawnSite Senior Member
 
Join Date: Apr 2004
Location: MYRTLE BEACH,SC
Posts: 397
SCLM............thank you for offering the scanned document. It will be very much appreciated!

Regards,

Mex
Reply With Quote
  #12  
Old 03-30-2013, 03:48 PM
MEXANDME MEXANDME is offline
LawnSite Senior Member
 
Join Date: Apr 2004
Location: MYRTLE BEACH,SC
Posts: 397
I think that I just verified that I have 2 dedicated conductors between the 2 controllers. On one end (where the old RC 7-A is) I have the RED and the WHITE in a 5 conductor multi-strand (the other 3 conductors are not in use). On the other end (where the ESPM is) I have 2 PURPLE single strand conductors terminated; one on the COMMON terminal and one on the MV terminal. With the RED and WHITE opened up on the RC 7-A end, I turned on the ESPM controller on the other end and I am getting 28 volts on the RED and White at the RC 7-A end.

I guess now it is just a matter of getting 2 ISOLATORS and wiring them in as per the instructions.

Am I missing anything??????????

Again, thanks to all who have replied. This one was out of my league but it is becoming a little clearer now.

Regards,

Mex
Reply With Quote
  #13  
Old 03-30-2013, 04:19 PM
greenmonster304's Avatar
greenmonster304 greenmonster304 is offline
LawnSite Silver Member
 
Join Date: Jul 2007
Location: You Know
Posts: 2,373
Quote:
Originally Posted by HunterTekGeek View Post
I agree with the other posts suggesting you contact your irrigation manufacturer for an isolation relay schematic. If you back-feed the RC-7A with 24 VAC through the Master Valve circuit (from the other controller) it will activate the rapid advance motor, click over to Station 1, and start the controller.
Are you the geek who sent me the I Core face panel and module the other day.
Reply With Quote
  #14  
Old 03-30-2013, 07:40 PM
SoCalLandscapeMgmt SoCalLandscapeMgmt is offline
LawnSite Bronze Member
 
Join Date: Sep 2007
Location: So. Cal.
Posts: 1,429
Quote:
Originally Posted by HunterTekGeek View Post
I agree with the other posts suggesting you contact your irrigation manufacturer for an isolation relay schematic. If you back-feed the RC-7A with 24 VAC through the Master Valve circuit (from the other controller) it will activate the rapid advance motor, click over to Station 1, and start the controller.
you'd better watch it Rod.... or Greg is going to dock you a day's pay for giving advice on the competitors product.
Reply With Quote
  #15  
Old 04-06-2013, 06:26 AM
MEXANDME MEXANDME is offline
LawnSite Senior Member
 
Join Date: Apr 2004
Location: MYRTLE BEACH,SC
Posts: 397
Installed the two ISOLATORS yesterday (picked them up from the local JDL).

All worked great!

Thanks for everyone's help!

Regards,

Mex
Reply With Quote
  #16  
Old 04-06-2013, 06:54 AM
1idejim's Avatar
1idejim 1idejim is offline
LawnSite Fanatic
 
Join Date: Jul 2009
Location: State of Jefferson
Posts: 6,826
Good for you, thanks for the update M&M
Posted via Mobile Device
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 07:03 PM.

Page generated in 0.06679 seconds with 9 queries