Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #11  
Old 04-08-2013, 06:43 AM
ricky86 ricky86 is offline
LawnSite Bronze Member
 
Join Date: Aug 2008
Location: Monmouth Cty N.J.
Posts: 1,266
Very stange. Toro does have floating deck hydros. 30488 and 30489. 48" and 52"
Reply With Quote
  #12  
Old 04-08-2013, 09:53 AM
locallawncare.ca locallawncare.ca is offline
LawnSite Senior Member
 
Join Date: Oct 2012
Location: Ontario
Posts: 700
I would just use different washers to adjust your height, you said it needs to be within 1/8", no mower is that accurate from the factory, most only have 1/2" adjustment and a few have 1/4" adjustment. With the turf tracer you can fine tune the height by placing or removing washers from the height adjustment pins. But it looks like you got a new mower anyways, good for you.
__________________
Reply With Quote
  #13  
Old 04-08-2013, 08:41 PM
IRRITECH's Avatar
IRRITECH IRRITECH is offline
LawnSite Senior Member
 
Join Date: Dec 2003
Location: ATLANTA, GA
Posts: 931
Quote:
Originally Posted by locallawncare.ca View Post
I would just use different washers to adjust your height, you said it needs to be within 1/8", no mower is that accurate from the factory, most only have 1/2" adjustment and a few have 1/4" adjustment. With the turf tracer you can fine tune the height by placing or removing washers from the height adjustment pins. But it looks like you got a new mower anyways, good for you.
You can raise the height that way but if it is high, your screwed. Taking out the original washer is not an option. Any new mower should come within a minimum of 1/4" of specified height.

Quote:
Originally Posted by ricky86 View Post
Very stange. Toro does have floating deck hydros. 30488 and 30489. 48" and 52"
Yes they do, but they have those screwed up controls. There is a rumor that they are going to offer a pistol grip version in the next few years.
__________________
The reigning Mayor of Stupidville
Reply With Quote
  #14  
Old 04-08-2013, 08:57 PM
whiffyspark whiffyspark is online now
LawnSite Fanatic
 
Join Date: Jul 2011
Location: Chesapeake beach
Posts: 5,445
Quote:
Originally Posted by IRRITECH View Post
read the first post. The BLADE HEIGHT IS 3/4" OFF. Now what do you do??
Are you saying the blade height is 3/4 off from what the sticker says?

That's what I assumed
Posted via Mobile Device
Reply With Quote
  #15  
Old 04-08-2013, 09:28 PM
IRRITECH's Avatar
IRRITECH IRRITECH is offline
LawnSite Senior Member
 
Join Date: Dec 2003
Location: ATLANTA, GA
Posts: 931
Quote:
Originally Posted by whiffyspark View Post
Are you saying the blade height is 3/4 off from what the sticker says?

That's what I assumed
Posted via Mobile Device
Yes, in the set hole for 2" , the blade height was 2 3/4".
__________________
The reigning Mayor of Stupidville
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 11:42 AM.

Page generated in 0.06067 seconds with 9 queries